View Full Version : Autoliv 550 86 45 00 Peugeot 306 need clear crash data
goyodesanctis
2nd August, 2018, 08:13 PM
Hi to all!!!
I have to clear crash data in 95080 eeprom from autoliv 550 86 45 00 Peugeot 306.
I have read with carprog but the clear and crash are the same.
Car has two errors,from seatbel tensioners.
I'll upload another one, that I have done manually.
It's correct???
Any help really appreciated.
I have soldered cables directly and I can't desolder until have a good cleared dump.
Regards!!!
slick_dick
2nd August, 2018, 08:16 PM
post diag faults with description
i help u
goyodesanctis
2nd August, 2018, 11:11 PM
post diag faults with description
i help uThese two faults 546569
Enviado desde mi Hisense L671 mediante Tapatalk
goyodesanctis
2nd August, 2018, 11:12 PM
These two faults 546569
Enviado desde mi Hisense L671 mediante Tapatalk546571
Enviado desde mi Hisense L671 mediante Tapatalk
goyodesanctis
2nd August, 2018, 11:14 PM
post diag faults with description
i help uP10A0 airbag or Seatbelt tensioners crash
P10B0 seatbelts crash
Enviado desde mi Hisense L671 mediante Tapatalk
goyodesanctis
3rd August, 2018, 05:09 PM
post diag faults with description
i help uCould you help me please?
Enviado desde mi Hisense L671 mediante Tapatalk
slick_dick
3rd August, 2018, 07:00 PM
try this
if i helped press the magic buttons
no pass
good luck
slick:chuncky:
Abdo Abdelatif
3rd August, 2018, 07:07 PM
HI 306 is clear pass ind pm
goyodesanctis
5th August, 2018, 10:24 AM
Thanks to both, mates, files are the same in my fisrt post, cleared, but no problem.
Last friday car was 3 errors and I think, there are in installation,because car was in an electrical garage.
And they touch in aribar wiring.
Tomorrow I will report if I can find solution.
Thanks anyway, you have served me very great help.
I'm making an hybrid file, I don`t like, line F0-FF.
I think it should start by D1,not 00 D1.
I will test.
Cheers!!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.