View Full Version : Nissan LCN
Raimax
5th August, 2018, 05:44 PM
Hello,
Need code for Nissan LCN
7 612 830 022
Thanks
Jupiter199
5th August, 2018, 05:48 PM
Code is 6400
Raimax
5th August, 2018, 08:09 PM
Thanks mate code is correct.
I have one problem. I want to write a full flash dump to radio. Always makes a mistake. I tried different options. I think the addresses do not match
I use J-Link and to read sector or full dump no problem.
Can you advise me?
ilian_cho
6th August, 2018, 06:26 AM
Memory size is corect-64Mx8. I think that you try to write x8 and chip organization is 16 bits.
prodan
6th August, 2018, 08:53 AM
You can not write full flash , sector 0 is protected.
Set correct flash memory base address and try to write any other sector...
wbr
Raimax
6th August, 2018, 11:01 AM
Thanks for the advice
I can write one or two sectors without problems
When I change the base address there is no connection.
I tried to bypass 0 sector. I also deleted 0 sector in the dump. I wrote from 20000 to 3FFFFFF. The radio goes out :(
Later I will try to revive if I succeed
prodan
6th August, 2018, 11:55 AM
My advice about base address is based on experience with my project, which I wrote alone and seems there are difference in projects we use...
I have broken LCN unit for experiments, wired it and tested the project you use to be sure.
Pics are from my own project...
Raimax
6th August, 2018, 12:13 PM
----------------------
Raimax
6th August, 2018, 01:13 PM
connection is. I can not read any sector than a full flash.
With another project file connection is but also does not read. Radio does not work
prodan
6th August, 2018, 01:50 PM
I suggest to set RAM size to 64kB, disconnect power supply and try again.
Just a shot in the dark...
Raimax
6th August, 2018, 01:57 PM
Thanks mate I'll try
EDIT: There is no difference either 64KB or 96KB.
I tried to remove the front radio panel. A few sectors succeed in reading and stop.
Raimax
6th August, 2018, 09:54 PM
Successfully deleted and writed the dump split into 50 sectors. The dump is from another radio
The red letters appeared and does not go away :guns:
mohamad1401
13th August, 2018, 06:08 PM
hello
please Is it a solution For this problem
mohamad1401
13th August, 2018, 07:19 PM
sector 507
please code and how to reset counter incorrect pin entered too many times nissan
smoggy
13th August, 2018, 08:14 PM
sector 507
please code and how to reset counter incorrect pin entered too many times nissan
try code 1692.....reset ???
mohamad1401
13th August, 2018, 08:22 PM
thanks radio blocked As the picture
Juliano31
13th August, 2018, 08:50 PM
thanks radio blocked As the picture
Use search button
http://www.digital-kaos.co.uk/forums/showthread.php/678169-Nissan-LCN-EU
Thinner
13th August, 2018, 09:40 PM
Hi,
code is 1692 as smoggy said. Current solution is to erase sectors 265 and 266 but this will destroy the whole file system with data loss.
Post full dump and give me some time, i maybe have a less destructive solution. But you need to know how to write sequence of sectors and you will be the first one trying this solution.
wbr
thanks radio blocked As the picture
mohamad1401
13th August, 2018, 10:35 PM
all ok thanks smoggy and
Thinner (http://www.digital-kaos.co.uk/forums/member.php/446826-Thinner)
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.