View Full Version : DCM 3.5 Ford Mondeo MK4 - reading/writing with KESS CLONE
maajkii
7th August, 2018, 01:47 PM
Hello guys.
Anyone
Read / Write ecu with sucess via Kess 5.017?
Customer get a car but he got only kess, im not shure what should i tell him.
Car is FORD MONDEO MK4 DCM3.5 2.0TDCI 115KM
twincam
7th August, 2018, 01:50 PM
It should read this ecu without any problem
ivanmihov
7th August, 2018, 01:52 PM
but would it write it,can anyone confirm kess is OK for writing this ecu
twincam
7th August, 2018, 01:53 PM
Is ok ,i’ve made a couple of them without any issues .
maajkii
7th August, 2018, 01:58 PM
i need to be 90% shure ( 10% is just ~~~~ed ecu what can happens with genuine tool also )
if anyone have troubles with it, customer just skip this car
Inquizit0r
7th August, 2018, 02:25 PM
This is simple ECU. I write it on car even with 11,2V. Never have any problems. ANY. 5.017, clone.
Geri12
7th August, 2018, 06:03 PM
No problem ! I did it several times on Delphi DCM 3.5 PSA. Must be OK for Ford.
sdtsedat
7th August, 2018, 07:10 PM
Jep, possible with clone
maajkii
9th August, 2018, 12:55 AM
Just The info.
Sucessfully read/ write via OBD.
Wysłane z mojego SM-G935F przy użyciu Tapatalka
lucim12
8th July, 2021, 11:38 AM
Why so much false info?
Many people complain about corrupting flash with Kess v2 even original! on this ecu. i tested 3 of those cars around year 2010 and kess does not read correctly! Only woth doing by bench with ktag.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.