ivanmihov
20th August, 2018, 06:40 AM
Hi friends this car makes me big troubles
VW Golf 5 1.9 TDI PD engine code BKC
Car came with problem with egr,to make egr off so i did it with hysteresis maps zeroing 2 and 5 hysteresis
i did full backup of ecu in BDM with ktag,flash has some kind of remap so i kept the flash and did egr off over him
So i did egr off and wrote back to ecu only flash in bdm calculated checksum with winols.car started everything is OK no faulths with egr no limp mode,After 100 km glow plug light start blinking customer shut's down the car and after that car can''t start.Tried everything no fults in any module,every sensor is OK.Decided that there is a problem with ecu first wrote back original flash car no start again,so bought second hand ECU cloned it transfer back mod file with egr off and car started again,but after 100 km same situation glow plug light blinking with no faults car no start again,i have communication with ECU no faults just car no start probably don''t have injector pulses from ecu,what kills two ECU-S
VW Golf 5 1.9 TDI PD engine code BKC
Car came with problem with egr,to make egr off so i did it with hysteresis maps zeroing 2 and 5 hysteresis
i did full backup of ecu in BDM with ktag,flash has some kind of remap so i kept the flash and did egr off over him
So i did egr off and wrote back to ecu only flash in bdm calculated checksum with winols.car started everything is OK no faulths with egr no limp mode,After 100 km glow plug light start blinking customer shut's down the car and after that car can''t start.Tried everything no fults in any module,every sensor is OK.Decided that there is a problem with ecu first wrote back original flash car no start again,so bought second hand ECU cloned it transfer back mod file with egr off and car started again,but after 100 km same situation glow plug light blinking with no faults car no start again,i have communication with ECU no faults just car no start probably don''t have injector pulses from ecu,what kills two ECU-S