PDA

View Full Version : Kess v2 v4.036



sergiobrdgz
23rd August, 2018, 01:39 PM
Hello

Since a few days ago I am trying to repair my kess v2 v4.036. I searched through all the posts for the sd files and possible solutions. I have tried with new sd card, formatted with non-Windows programs. sometimes, he tells me that the protocol is not valid and sometimes he tells me that the ecu is unknown (this happens to me with TEMIC DQ250). Can someone help me?

Thank you

sergiobrdgz
23rd August, 2018, 01:39 PM
Device type: M
FW version: 4.036
Serial Number: K10033818
Custome Code: C7514
Group Code: C7514

sergiobrdgz
23rd August, 2018, 06:58 PM
No body can help me?

shooting
25th August, 2018, 03:54 PM
No body can help me?

Use this software update on internal SD card

https://mega.nz/#!ZN5wHKTC!yGtulxix4GOMPqdIUtCp6HdxnaEK0Kg8uAHtiYb 5e3g


wbr


EDIT: Here without pass ---> https://mega.nz/file/NEwnQKQY#Q2abCItulSfp8CPwCR40Dod55XzSx6XxMH_WXNePN mQ

sergiobrdgz
25th August, 2018, 03:56 PM
Use this software update on internal SD card

https://mega.nz/#!ZN5wHKTC!yGtulxix4GOMPqdIUtCp6HdxnaEK0Kg8uAHtiYb 5e3g


wbrThank you so much shooting.

Maybe you can suggest the software for the laptop?

I think I am using the wrong one too.

Last time everything worked I was using the version 2.08

shooting
25th August, 2018, 03:58 PM
Thank you so much shooting.

Maybe you can suggest the software for the laptop?

I think I am using the wrong one too.

Last time everything worked I was using the version 2.08

Use 2.32, this works well

wbr

sergiobrdgz
25th August, 2018, 04:04 PM
Use 2.32, this works well

wbrDo you know from where can I download it ?

I will appreciate if you let me know

shooting
25th August, 2018, 04:08 PM
Do you know from where can I download it ?

I will appreciate if you let me know

Here you go, same pass

wbr

sergiobrdgz
25th August, 2018, 04:10 PM
Here you go, same pass

wbrThank you. I will try and let you know results

shooting
25th August, 2018, 04:13 PM
Thank you. I will try and let you know results
Also remember to put your computer in "Flight Mode" when using the tool

wbr

sergiobrdgz
25th August, 2018, 04:14 PM
Also remember to put your computer in "Flight Mode" when using the tool

wbrYes, absolutely I will do

sergiobrdgz
25th August, 2018, 10:07 PM
Well, I installed and apparently the software works but I have to try it with the car yet.


These are the steps I have followed:


1. Deleted and formatted at low level the SD card.
2. Put the SD card back on the kess PCB.
3. Installation of the Kess software on the PC.
4. Connect the Kess to the PC.
5. Start the software.
6. Close and disconnect the Kess from the PC.
7. Put folders on the SD card of the Kess PCB.
8. Connect Kess to the PC and start the software again.


Have I done all the steps well?

shooting
25th August, 2018, 10:52 PM
Well, I installed and apparently the software works but I have to try it with the car yet.


These are the steps I have followed:


1. Deleted and formatted at low level the SD card.
2. Put the SD card back on the kess PCB.
3. Installation of the Kess software on the PC.
4. Connect the Kess to the PC.
5. Start the software.
6. Close and disconnect the Kess from the PC.
7. Put folders on the SD card of the Kess PCB.
8. Connect Kess to the PC and start the software again.


Have I done all the steps well?

If it boots and you can see the ecu choices then it's working

wbr

morgano
26th August, 2018, 09:24 AM
For 4.036 no sense use other sw than ksuite 2.08 internet safe.

To have correct files on sd just redo the update with ks2.08 and the update folder with the families.

sergiobrdgz
26th August, 2018, 10:28 AM
For 4.036 no sense use other sw than ksuite 2.08 internet safe.

To have correct files on sd just redo the update with ks2.08 and the update folder with the families.The problem is I don't have ksuite 2.08 internet safe.

For the correct files...what do you mean ?

Install 2.08 ksuite and let it update the sd card ?

AKH84
26th August, 2018, 10:40 AM
ksuite 2.08 internet safe
https://mega.nz/#!rB8zkIzA!L6qhNKkMnat1ZksqxCjaSgN50LlWJ13UA6Uqk24 aeL4

sergiobrdgz
26th August, 2018, 11:09 AM
ksuite 2.08 internet safe
https://mega.nz/#!rB8zkIzA!L6qhNKkMnat1ZksqxCjaSgN50LlWJ13UA6Uqk24 aeL4Thank you.

What he means with the "correct files" ?

Which step do I have to follow?

morgano
26th August, 2018, 12:10 PM
Look thread to update kess to 4.036

There is a pack with the update folder to be copied over same one in ksuite 2.08 installation path and let ksuite restore your sd files.

sergiobrdgz
26th August, 2018, 12:36 PM
Do you mean that thred ? http://www.digital-kaos.co.uk/forums/showthread.php/648277-kess-4-036-update-to-5-017?highlight=update+kess+4.036

shooting
26th August, 2018, 02:27 PM
Do you mean that thred ? http://www.digital-kaos.co.uk/forums/showthread.php/648277-kess-4-036-update-to-5-017?highlight=update+kess+4.036

Did my solution not work??????

Copy software to SD card and install it inside hardware then run Setup for 2.32, simple

this should work....

wbr

sergiobrdgz
26th August, 2018, 03:07 PM
Did my solution not work??????

Copy software to SD card and install it inside hardware then run Setup for 2.32, simple

this should work....

wbr

Your solution works fine. I have to try and read the TEMIC DQ250 for a Golf V GTI, that's an DSG ECU that I need right now. But I'm a little confused. When I install the Ksuite on the computer, it makes a folder on C:. With the folders that you shared with me, I though I have to put it in the sd card, not in the folder that the program makes on C: right ?

ASAP I try, I will let you know

shooting
26th August, 2018, 03:27 PM
Your solution works fine. I have to try and read the TEMIC DQ250 for a Golf V GTI, that's an DSG ECU that I need right now. But I'm a little confused. When I install the Ksuite on the computer, it makes a folder on C:. With the folders that you shared with me, I though I have to put it in the sd card, not in the folder that the program makes on C: right ?

ASAP I try, I will let you know

Software for SD is in Post#4

wbr

sergiobrdgz
26th August, 2018, 03:38 PM
Software for SD is in Post#4

wbrI understand that I may seem confused, but I need some clarifications. First install Ksuite, version 2.32. Second, I took the files from post # 4 and put them on the SD card. Third, I put the SD in the Kess PCB and then I started the program. Is what I did right

shooting
26th August, 2018, 03:53 PM
I understand that I may seem confused, but I need some clarifications. First install Ksuite, version 2.32. Second, I took the files from post # 4 and put them on the SD card. Third, I put the SD in the Kess PCB and then I started the program. Is what I did right

Other way around, put Post#4 software on SD card and put it in the hardware, THEN run ksuite version 2.32

wbr

sergiobrdgz
26th August, 2018, 03:56 PM
Other way around, put Post#4 software on SD card and put it in the hardware, THEN run ksuite version 2.32

wbrIn the hardware? Do you mean in the folder inside of C: ?

shooting
26th August, 2018, 03:58 PM
In the hardware? Do you mean in the folder inside of C: ?

The software from Post#4 goes ON the SD card then you put it inside your kess hardware, then run Ksuite 2.32

wbr

sergiobrdgz
26th August, 2018, 03:59 PM
The software from Post#4 goes ON the SD card then you put it inside your kess hardware, then run Ksuite 2.32

wbrHow can I put inside of my Kess hardware?

shooting
26th August, 2018, 04:05 PM
How can I put inside of my Kess hardware?

Inside your Kess hardware is an SD card, remove this and replace the software with Post#4

wbr

sergiobrdgz
27th August, 2018, 07:47 AM
Inside your Kess hardware is an SD card, remove this and replace the software with Post#4

wbrFinally today I tried to read TEMIC DQ250.

This is the message I received when I tried ID and READING.

sergiobrdgz
27th August, 2018, 07:48 AM
That message. Same message appears trying ID or READING. I click OK but it doesn't starts reading, goes back to main MENU.
https://uploads.tapatalk-cdn.com/20180827/377a7a73c875e5404b8bbcbafaf95d4e.jpg

sergiobrdgz
27th August, 2018, 09:23 AM
Do you know how to fix this problem @shooting ?

shooting
27th August, 2018, 10:34 AM
Do you know how to fix this problem @shooting ?

Can you read any other ecu?

wbr

sergiobrdgz
27th August, 2018, 12:02 PM
Yes I can but before I connected to internet by accident, I readed that TEMIC DSG ECU

sergiobrdgz
27th August, 2018, 12:30 PM
Can you read any other ecu?

wbr

If I can read other ECUs, but I remember that before I accidentally connected to the internet, I could read with Kess the DSG TEMIC DQ250 gearbox by OBD

krokodyl30
31st August, 2018, 09:55 AM
Hello, I can ask for a password for files? I have a similar problem with my kess.

Geri12
31st August, 2018, 10:23 AM
Sir
I have try to send a pm but it's imopossible. Can I have the pass for the SD Card files?

scsaba
22nd February, 2019, 10:33 AM
Hello!
I have similar problem. Can I have the password?
THX

aminr
15th March, 2019, 09:16 PM
pass plz bro i need this files too

adjee
31st March, 2019, 11:15 PM
hi friends
can i have a pass please ?

thanks in advance

Peppos3
1st April, 2019, 01:43 PM
Hy,
can I have psw thread #4 ???
Thanks

robyuno
5th April, 2019, 10:27 PM
Dear, can i have the password please ?

Tomate
6th April, 2019, 06:47 AM
Hello! can you please give me pass too? i`ve made a mistake. until working with kess notebook conneted with mobile phone and used hotspot connection to go online ...
it would help me so much! thank you
regards

LilLew2016
22nd February, 2020, 11:19 PM
Use this software update on internal SD card

https://mega.nz/#!ZN5wHKTC!yGtulxix4GOMPqdIUtCp6HdxnaEK0Kg8uAHtiYb 5e3g


wbr

hi im trying these solutions with my kess after the sd card died please could you tell me the password sorry for bumping an old thread

Keith8000
9th March, 2020, 03:46 PM
I too am struggling with my Kess. Use for personal use, not used for a while and left it connected to internet. so bben looking and trying for last 3 days to fine a soloution.. I am also on FW 4.036, with serial K10033818. cannot seem to fine a working fix. I would greatly appreciate if some wizard could help me with the fix please?.. I did have a customer and group code of C5555 but somehow i now have codes blank now..

BubbaFet
23rd July, 2020, 08:31 PM
Use this software update on internal SD card

https://mega.nz/#!ZN5wHKTC!yGtulxix4GOMPqdIUtCp6HdxnaEK0Kg8uAHtiYb 5e3g


wbr

I tried to send you a pm for the PW - but something is not working :/

Can you share the pw for the archive?

BubbaFet
23rd July, 2020, 08:32 PM
ksuite 2.08 internet safe
https://mega.nz/#!rB8zkIzA!L6qhNKkMnat1ZksqxCjaSgN50LlWJ13UA6Uqk24 aeL4

Same as above - something fails when Itry to send pm’s. Can you share the pw for it ?

nesok78
14th December, 2021, 09:06 PM
Hello, I can ask for a password for files? I have a similar problem with my kess.