View Full Version : sid801 immo problem
ricards99
24th November, 2009, 07:25 PM
hi, i need immo off file for siemens sid801 ecu for peugeot 307 hdi 2.0l, or virgin dump
thanks for all
i have 1 dump but car dont go over 3000 rpm
ricards99
24th November, 2009, 08:18 PM
or can i have pin from ecu dump
thanks
morito
24th November, 2009, 10:33 PM
hi
post your dump
is 93c56???
regards
Persia
24th November, 2009, 10:45 PM
what is eeprom number?
ricards99
25th November, 2009, 08:11 AM
it's a 93c56 and will post dump today,
thanks
busaman
25th November, 2009, 09:07 AM
you may have to telecode the car (pair bsi to ecu) i have had this before
ricards99
25th November, 2009, 12:00 PM
yes i would like to telecode the bsi but i have not the pin, and no vin too, the bsi is virgin,
i read the 93c56 in ecu and post here if someone can read pin for me, i had doubt for reading in 16 or 8 bit, in the rar file i put the two files, thanks for help
Ezber_Bittar
25th November, 2009, 12:22 PM
Hi
i think that the best way to solv ur problem is going on autorestore bsi
i'll post procedure later...
ricards99
25th November, 2009, 07:52 PM
please, any suggestion
benci1982
25th November, 2009, 08:59 PM
trythis file, (16bit mode):bath:
diagmoh
25th November, 2009, 09:45 PM
YOUR CODE PIN:Y558
ENJOY
IF YOU NEED IMMO OFF TRY SWAP BYTE IN ORIGINAL DUMP
ricards99
26th November, 2009, 03:49 PM
thank you, solved
youness56
6th October, 2010, 04:02 PM
benci1982 your dump is 100% good for 307 sid 801 and rmp 5500 tr/min
autodiagfrom
7th January, 2013, 02:44 PM
thank you will test this one
Meat-Head
12th January, 2013, 09:51 PM
thank you will test this one
yeah did you would like to know for leeching reasons?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.