PDA

View Full Version : simens ppd tuning limited at 420 nm



kinkong7
27th August, 2018, 02:36 PM
Hi friends. When i trying to raise torque something cuts off at a value of 420 nm. 2 smoke limiters increased to 450 nm. It looks like a single limiter value. Who know, tell me please the addres of this limiter.

voltechcar
27th August, 2018, 02:40 PM
egt, tq limiters, dw, 2 smoke limiters.

kinkong7
27th August, 2018, 02:42 PM
Egt raised, torque limiter too. What is dw?

voltechcar
27th August, 2018, 02:43 PM
driver wish. Upload stock and tune I check

kinkong7
27th August, 2018, 02:45 PM
driver wish raised too

kinkong7
27th August, 2018, 02:54 PM
almost stock by link: https://drive.google.com/open?id=1GGL_IGFrgIUVDcohPr_94tfkeNBNnCS_

voltechcar
27th August, 2018, 04:18 PM
[QUOTE=kinkong7;3357057]almost stock and tuned by link: https://drive.google.com/open?id=1GGL_IGFrgIUVDcohPr_94tfkeNBNnCS_[/QUOTE

try this

kinkong7
27th August, 2018, 04:39 PM
Thank you, i will try

kinkong7
28th August, 2018, 04:43 AM
File is good, but something limits at 420 nm too. Can anybody help with damos siemens ppd sn100L8000000?

voltechcar
28th August, 2018, 08:59 AM
use vcds and check parameters and save logs than we check.

kinkong7
28th August, 2018, 09:18 AM
This is a log ( my tune file, 5 gear ): https://drive.google.com/open?id=1f_KvV4iDL0eQIACsxdXMnvNNgGiSZs57.
Group 9 - field 3 limits the torque at 420nm

voltechcar
28th August, 2018, 10:33 AM
on my file upload logs

kinkong7
28th August, 2018, 11:30 AM
your file works just like mine and limited 420 nm in the same field 9-3 vcds, acceleration 40 - 100 is the same ( measured vcds ).

kinkong7
28th August, 2018, 06:53 PM
on my file upload logs
New log on your file : https://drive.google.com/open?id=15c0prpDuRreFcXImpZsfXdq-fu-240KJ

BadgerBox
29th August, 2018, 10:58 PM
420nm is a diag limit, not a physical limit so car will inject more fuel, just diag won't display the values.

Decalibrate NmtoIQ in last column to check

kinkong7
30th August, 2018, 08:42 AM
420nm is a diag limit, not a physical limit so car will inject more fuel, just diag won't display the values.

Decalibrate NmtoIQ in last column to check Thank you, but in stock at 2500 rpm i have 392 nm and 65 mg/str, in tune 2500 rpm i have 420 nm and 70 mg/str. 70 mg corresponds to 420 nm ( 392/65 * 70 ) , it means that I have really 420 nm.