goyodesanctis
28th August, 2018, 09:51 AM
Hello everyone!!!
I have a problem with a Peugeot 407 SID 803.
I have canceled the dpf and the egr, and I still have several DTCs left. I have not managed to find Damos, Siemens PPD maps, it detects well in SID803a, but not in this, and these are:
-P0471: Discharge differential pressure sensor signal.
-P0299: Regulation of the Turbo pressure.
-P2565: Turbo pressure solenoid valve (is new and changed).
-P1429: Signal differential pressure sensor discharge.
-P1597: Circuit of the bypass solenoid valve, refrigeration circuit. Circuit open.
-P2031: Temperature of the rear catalyst. Cold engine consistency.
-P0095: Air temperature signal after the exchanger.
Coherence of the temperature output.
With my file I have achieved that P2031 and P0095 do not appear anymore. I have taken all possible data from my SID file 803 a, to compare, although there are very different sectors, and I would have the first 5 errors.
Could someone help with the dtc switch 1,2 ???
I already have an egr model and dpf off but I do not like it.
Really grateful, really.
Attached ORI as it came, with egr and dpf off, and my file with mappack and ols project.
Regards!!!
I have a problem with a Peugeot 407 SID 803.
I have canceled the dpf and the egr, and I still have several DTCs left. I have not managed to find Damos, Siemens PPD maps, it detects well in SID803a, but not in this, and these are:
-P0471: Discharge differential pressure sensor signal.
-P0299: Regulation of the Turbo pressure.
-P2565: Turbo pressure solenoid valve (is new and changed).
-P1429: Signal differential pressure sensor discharge.
-P1597: Circuit of the bypass solenoid valve, refrigeration circuit. Circuit open.
-P2031: Temperature of the rear catalyst. Cold engine consistency.
-P0095: Air temperature signal after the exchanger.
Coherence of the temperature output.
With my file I have achieved that P2031 and P0095 do not appear anymore. I have taken all possible data from my SID file 803 a, to compare, although there are very different sectors, and I would have the first 5 errors.
Could someone help with the dtc switch 1,2 ???
I already have an egr model and dpf off but I do not like it.
Really grateful, really.
Attached ORI as it came, with egr and dpf off, and my file with mappack and ols project.
Regards!!!