Safir 2 55 pins pinout

[captainmac64]

Hi , I seek about the complete pinout of Safir 2 55pins. I found only pinout for immo off but I want to check this ecu on "table" not on vehicule.

Someone can help me ?

Thanks

Kind regards

[Pyromaniak]

k line pin 11 - press buttons

[captainmac64]

Thanks for reply but I don't understand your reply, is it mean I need to put an button between pin 11 and ground (or +12v) ? Actual wiring:
pin 1 : 12v
Pin 2-3-18: ground
Pin 40 : Relay connected to 12v
Pin 48 : Relay connected to 12v
Pin 43 : lamp connected to 12v

When I power UP, only Relay on pin 40 is on. Lamp is off ans can't find the pin of MIL lamp. So I need full pinout for view what is missing...

Thanks a lot
Kind regards

[Pyromaniak]

i write you k line pin, all others you have in renault ecu decoder pdf. or try autodata like me :)

Under avatar is thanks button, and star button (reputation) That i mean press buttons ;)

[cezars1]

pin 2,3 -12v
pin 24 +12v
pin 32+12v
pin 43 -12v led +12v ACC (pin24)
pin 22 of 27c512 to ground (-) for 3 or 4 second
immo off when the lamp stays on
cut pin 37 (1,4 or 1,6) or pin 35 (1,8 or 2,0)

[Pyromaniak]

pin 2,3 -12v
pin 24 +12v
pin 32+12v
pin 43 -12v led +12v ACC (pin24)
pin 22 of 27c512 to ground (-) for 3 or 4 second
immo off when the lamp stays on
cut pin 37 (1,4 or 1,6) or pin 35 (1,8 or 2,0)

http://www.digital-kaos.co.uk/forums/showthread.php/571176-Siemens-Fenix-5-ECU-IMMO-OFF?highlight=fenix+immo
Like here :D BR

[cezars1]

https://www.youtube.com/watch?v=_wEn8ai4S9M