PDA

View Full Version : AIRBAG DUMP MEGANE 2007/2008



MEH
25th November, 2009, 07:06 PM
Hello my friends need a airbag dump clear
for Renault megane 2007/2008

Memory st 95640

Autoliv 610 62 78 00
renault 8200874484

thanks

MEH
26th November, 2009, 03:20 PM
nobody FOR THIS AIRBAG ECU???

melmar
31st December, 2009, 06:52 PM
Was looking through old posts, might be of help if you still need it.....

MEH
2nd January, 2010, 12:10 PM
it is already tested?

melmar
2nd January, 2010, 12:46 PM
yes.. tested clear

MEH
3rd January, 2010, 01:31 AM
but why there is no VIN in the dump???

melmar
3rd January, 2010, 03:17 AM
This was the crash file, and clear together..

Jose19
3rd January, 2010, 03:46 AM
but why there is no VIN in the dump???
You have " CLIP " so, why you make that question!!!!
If the dump dont have VIN is because is " VIRGIN " so, you can adapt with " CLIP " without any problem... or you don?t know how to do it !!???:dong:

MEH
3rd January, 2010, 11:35 AM
there is a vin i dont select correctly the eprom with upa

Jose19
4th January, 2010, 01:16 AM
there is a vin i dont select correctly the eprom with upa
That you need to be with atention on next time, because you can demage somthing on the ecu or in the car.

hamwi
10th April, 2010, 08:10 PM
Thanks Thanks Thanks

weltune
16th April, 2011, 12:06 PM
need clear for renault megane airbag
make :autoliv 610 61 78 00
eep : 95640
renault no :8200962388
tried using earlier post as guide to clear dump unsuccessful,
fault DF194 replace computer after impact
thanks

weltune
17th April, 2011, 11:33 AM
cleared the dump by carprog, configure with clip, now no more fault code but actual value still need the airbag computer to be change, airbag light comes on after 1 minute ignition on. Photo & cleared dump attached, anyone have the solution for this, thanks

sl4ck
17th April, 2011, 12:16 PM
cleared the dump by carprog, configure with clip, now no more fault code but actual value still need the airbag computer to be change, airbag light comes on after 1 minute ignition on. Photo & cleared dump attached, anyone have the solution for this, thanks

Your crash dump has one aditional line and your clear dump is a little mess.

Try this dump, it's your cleared, almost sure it's ok, please give feedback

weltune
18th April, 2011, 02:24 AM
hello sl4ck
still the same, this time module have a permanent fault code df194 replace computer after crash, just like what i have tried in the earlier post,

weltune
21st April, 2011, 10:16 AM
thanks everyone for the helps, problem solved. the problem is with my crash dump. someone has edited the dump before the car came to me, i used crash dump from DK forum, clear it with carprog & edited the vin . thks again to everyone who help & tried to help

pay_may
1st October, 2011, 02:12 PM
Memory spi 95640

Autoliv 610 62 78 00
renault 8200874484

thanks

Canopy
12th October, 2011, 10:14 PM
This was the crash file, and clear together..

This two dumps are right example how you can clear the crash data.

But you need CLIP to finish the procedure.

Simple clearing of the CRASH dump is not working.

Ayway thanks for the solution !!!

For me is working perfect