View Full Version : bmw x6 xdrive 3.5d 2008 not start
garagesport
3rd September, 2018, 08:00 PM
Hello fellow I have this car that does not start dtc the following
DTC:
ECU: dtc438B
CAS: dtcA0B1
EGS / SMG: dtc507G
bmw x6 xdrive 3.5D
can someone help me thank you and greetings
macako6
3rd September, 2018, 08:45 PM
explained in more detail how these errors came, you worked for mileage or something else?
garagesport
3rd September, 2018, 09:27 PM
car stopped after an hour car without a battery
battery was changed and these failures and does not start
garagesport
4th September, 2018, 11:07 AM
someone can guide me about these car dtc does not start
garagesport
4th September, 2018, 12:53 PM
change the battery and I get these DTC
GWS: A82C, A82E.A830, A83A
ECU: 4232,4242,4252,4262,4222,4212
diagnosis x431 Pro 3
with a partner who would have to pay to start this car
flashtech
4th September, 2018, 12:57 PM
ECU : 4232,4242,4252,4262,4222,4212 - thouse faults are about glow plugs.
Did you tried to code battery after change?
garagesport
4th September, 2018, 01:08 PM
yes
GWS: A82C, A82E.A830, A83A
flashtech
4th September, 2018, 01:13 PM
yes
GWS: A82C, A82E.A830, A83A
Those are transmission faults (GWS shifter). If you delete faults they show up again?
A82C Lock A faulty
A82E Lock E faulty
A83A Invalid lever position
A830 "Resetting system faulty" : This fault is set if the GWS shifter cannot return from the Steptronic gate (left position) to the middle position when P is selected. The main reason for this fault is a mechanical blockage. If the shifter is being manually held to the left while the P button is pressed, after five return attempts, the A830 fault will be set with the P indicator flashing. Also, this fault may occur under extreme environmental conditions: extremely high or low ambient temperatures; under voltage conditions; or due to incorrect installation (excessive pressure from the shift gate bezel on the shifter disc).
More info here : https://www.bimmerforums.com/forum/showthread.php?2324654-2-transmission-error-code
garagesport
4th September, 2018, 01:39 PM
if I erase and go out again
flashtech
4th September, 2018, 01:54 PM
if I erase and go out again
Try to check shifter cable. And also maybe check relays in junction box...
garagesport
4th September, 2018, 07:00 PM
all checked
smotorsport
6th September, 2018, 08:45 AM
re align dde-cas. car is driven without charging battery?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.