View Full Version : Need Pinout Audi A4 2010 and tmr file if possible
eFighter
4th September, 2018, 11:29 AM
Hello I need the pinout for this dash:
8K0 920 930N (one grey 32pin connector)
Maybe someone has a TMR Can file for this dash?
bidu20
4th September, 2018, 01:58 PM
Hello I need the pinout for this dash:
8K0 920 930N (one grey 32pin connector)
Maybe someone has a TMR Can file for this dash?
Stecker grau
(Pin 1-16)
1
2
CAN Abschirmung
3
CAN Low
Orange - braun
4
CAN High
Orange - blau
5
Gebermasse für Geber Kraftstoff- vorratsanzeige
Pin 2
6
Geber für Kraftstoff- vorratsanzeige
Pin 4
7
Geber für Kraftstoff- vorratsanzeige
Pin 3
8
Tastermodul
9
Kraftstoff- vorratsgeber 2
Pin 2
10
Kraftstoff- vorratsgeber 2
Pin 1
11
12
13
14
15
16
Stecker grau
(Pin 17-32)
17
18
19
20
Checktaster
21
22
23
Funkuhr 5V
24
Funkuhr Signal
25
Ölstand
26
27
28
29
Kl. 31
30
Kl. 31
31
Kl. 30
32
Kl. 30
here mate
bidu20
4th September, 2018, 02:25 PM
what do you want test?
eFighter
4th September, 2018, 02:32 PM
Customer reports that the millage don't rise.
because of this I like to test the analog gauges.
Furthermore the Warning for open door is not shown in display, but this is maybe coused by coding.
bidu20
4th September, 2018, 02:42 PM
Customer reports that the millage don't rise.
because of this I like to test the analog gauges.
Furthermore the Warning for open door is not shown in display, but this is maybe coused by coding.
what can tools do you have?
eFighter
4th September, 2018, 03:15 PM
I have X-Analyser Version 1 with a Kvaser interface and CAN King
bidu20
4th September, 2018, 03:26 PM
I have X-Analyser Version 1 with a Kvaser interface and CAN King
ID=80,Type=D,DLC=8,Data=255 255 255 255 255 255 255 255
ID=709,Type=D,DLC=8,Data=255 255 255 255 255 255 255 255
ID=918,Type=D,DLC=8,Data=255 255 255 255 255 255 255 255
ID=1105,Type=D,DLC=8,Data=255 255 255 255 255 255 255 255
ID=1152,Type=D,DLC=8,Data=255 255 255 255 255 255 255 255
ID=1424,Type=D,DLC=8,Data=255 255 255 255 255 255 255 255
ID=1512,Type=D,DLC=8,Data=255 255 255 255 255 255 255 255
ID=1623,Type=D,DLC=8,Data=255 255 255 255 255 255 255 255
with this you have power up.. but i dont know if needles work or not..
eFighter
5th September, 2018, 09:07 AM
Hm it does not work,
Unit does not stay on continuously.
553852
bidu20
5th September, 2018, 10:31 AM
it goes on and off?
try this
Cycle Time is 1600
ID: 3C0 DLC: 4 4F 08 03 00
eFighter
5th September, 2018, 11:39 AM
Perfect it works, many thanks.
Do you have also a Idea how I can drive the analog gauges?
bidu20
5th September, 2018, 12:12 PM
cool.
not for sure.. but try:
ID 280h : DLC:8 00 1D 00 2F 00 00 00 00 (RPM)
ID 1A0h: DLC:8 00 40 48 24 FE FE 00 19 (Speed)
eFighter
5th September, 2018, 12:47 PM
Does not work,
280h and 1A0h are not possible every time when I try the programm change the ID to 280 and 1A0h...
bidu20
5th September, 2018, 12:51 PM
then i have no solution sorry
eFighter
5th September, 2018, 01:48 PM
Ok,
Thank you for your help. Maybe someone else has a Idea?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.