PDA

View Full Version : Audi A4 b6 1.8T 8E0909518M - P0601 - checksum error


matimonn
5th September, 2018, 09:42 AM
Audi A4 b6 1.8T 8E0909518M - P0601 - checksum error
Hello. Can someone help me with MIL ON with p0601 error?
Software was modified by ABT. I change it to ori with no results.
Aajii
5th September, 2018, 12:17 PM
you need to repair eeprom
matimonn
5th September, 2018, 02:07 PM
Ok. Here is 95040 eeprom from ECu. Can you or someone help me wuth this?
raceshadow
6th September, 2018, 08:16 AM
Ok. Here is 95040 eeprom from ECu. Can you or someone help me wuth this?

Post flash here. I will try fix it.
matimonn
6th September, 2018, 08:38 AM
Flash+eeprom
raceshadow
6th September, 2018, 10:07 AM
Flash+eeprom

Try this...
matimonn
6th September, 2018, 10:45 AM
Try this...
Sorry mate, dont work.
m2312l
6th September, 2018, 01:29 PM
maybe the physical eeprom or flash is damaged
raceshadow
6th September, 2018, 02:11 PM
Open your ECU and see if there is this inside. It is possible that ABT uses its algorithm. But I saw 2 ECUs from ABT that had the error of the checksum in the flash. It was necessary to remove this adapter and solder the new 29F800

554209
matimonn
6th September, 2018, 03:03 PM
29F800 is hard solded to board. There is no adapter.
matimonn
7th September, 2018, 10:31 AM
Mates, can you send me IMMO OFF file of 95040 eeprom for testing?