BMW e60 530d disable oil level sensor

[Sbaumil]

Need help to disable oil level senor ir bmw e60 530d.
got bmw foult codes 42AE, 4B37
thnx

[flashtech]

Better fix that. Disabling it is not a solution.

[Sbaumil]

its ecu problem, ive changed to brand new sensor, still fault..

[flashtech]

Ok. As You wish -here is the file.

P.S. Start to help other members..

[Sbaumil]

dtc is off, bet still error on idrive.
if I clear dtc, error disapears for a few seconds in idrive, but then it show up. I codded it out.
any suggestions?

[flashtech]

Do You codded it out from all blocks?

[Sbaumil]

yes, from kombi and champ

[smotorsport]

Despite you code it out it'll still appear. Problem is not ecu for sure maybe wiring?

[Ignasvw]

Its not possible. You can make coding on those E series which was without that sensor in earlier versions/or newer. Disabling dtc will not show codes in diag, but you will have information on dash or TV

[Yhoni]

Hello friends, I have the same problem in a BMW 330D E60.

I have disabled the dtc in the ecu but it still shows the failure of the oil level sensor in the idrive "BROKEN OIL LEVEL SENSOR!", Within the "CHECK-CONTROL NOTICES" menu.

Does anyone know what options I should activate/deactivate in the coding with NCS_EXPERT so that the idrive would stop showing the warning, please?

Thanks.

PS: This vehicle has a dipstick to be able to look at the oil level in the engine manually and the customer is the one who requests this cancellation.

[Silva1337]

forget , its not possible

[Yhoni]

forget , its not possible

:apologetic: are you sure, mate?.

Do not have coding for disable this sensor withing Idrive (CDI), please?.

[Silva1337]

yes sure, check bsd line in car

[Inquizit0r]

Disable whole engine...

[Yhoni]

Disable whole engine...

Hello Inquizit0r, i have a BMW 318IS of 1997 year and 200.000km and it do not have oil level sensor.

Do you think that do it have any problem for do not have he oil level sensor on?.

Please, Only constructive responses.

Thanks.

[Inquizit0r]

Do not compare old museum engine of 318IS and modern diesel M57xx.
Thermal oil sensor is useful and important part of engine - temp of oil is necessary value for right engine woriking.
If we speak about modern engines. Not ancient devices.

[Yhoni]

Disable whole engine...

To answer what you have answered, you are better silent.

Please only constructive responses ...

Thanks.

[Babos]

Write me in PM i can to off.