PDA

View Full Version : Audi 3.0Tdi EDC16CP34 DTC P3348



figani
8th September, 2018, 04:40 PM
hi...


I have a Audi A4 3.0 tdi here with an edc16cp34, SW: 1037376009, SW Upg.: 8E0910401F 0050...


itīs pssible to delete dtc p3348 and p0235?


thanks

flashtech
8th September, 2018, 07:19 PM
Hi! Try this.

banelab
8th September, 2018, 07:44 PM
but how you drive it without turbo?

figani
8th September, 2018, 08:05 PM
car works normal, after 3 o4 days it goes in limp mode... start again everything well...

you have a better solution?

kennyash1
8th September, 2018, 08:06 PM
car works normal, after 3 o4 days it goes in limp mode... start again everything well...

you have a better solution?

find the problem always better than delete ? sticky vanes maybe?

kennyash1
8th September, 2018, 08:07 PM
change turbo actuator!!

figani
8th September, 2018, 08:10 PM
customer changed both... new...

kennyash1
8th September, 2018, 08:11 PM
customer changed both... new...

ah bugger its one of those is it.... wiring or ecu then probably, also check all fuses for actuator they can go bad apparently, bloody electric actuator vac system was much better

figani
8th September, 2018, 08:13 PM
car have 448567 kilometers... car drove normal... still want not longer limp mode... thatīs all...

kennyash1
8th September, 2018, 08:16 PM
the chances are whatever is going wrong even for a few seconds will cause the car to behave badly for a few seconds or loose power. If you delete limp mode still be prepared for the odd chuff of smoke and power loss... I dont see this being a great solution but i have been proven wrong many times before buddy

banelab
8th September, 2018, 08:31 PM
if but if it is new actuator then u can have problem with small actuator for vacuum on egr cooler.Sometimes internal resistance of that valve may be prob for ecu and manifest in that way.