PDA

View Full Version : Help pin hyundai coupe



wissamshaat
9th September, 2018, 05:59 PM
Hello everyone
I have a problem with prog a key of a huyndai coupe
When i put vin to calculator i have a pin : 650848
And it dont works
Can anyone give a good pin from vin??
Thank you

simplo
9th September, 2018, 08:03 PM
What's your vin ? Car is with year ?

wissamshaat
9th September, 2018, 08:04 PM
vin is in picture i dont know what year exactly it is
vin : KMHHN61FP5U171657

wissamshaat
9th September, 2018, 09:31 PM
its a 2005

Rastanova
9th September, 2018, 10:16 PM
Hold on. I’ll get you the pin


Sent from my iPhone using Tapatalk

Rastanova
9th September, 2018, 10:35 PM
650848


Sent from my iPhone using Tapatalk

wissamshaat
9th September, 2018, 10:41 PM
you didnt read my post???
this code i had it and it dont works

Rastanova
9th September, 2018, 10:47 PM
My bad, didn’t see it. I’ll try another way to see if I can get another pin off the same vin


Sent from my iPhone using Tapatalk

wissamshaat
9th September, 2018, 10:52 PM
thank you anyway and welcom to forum

dtip
10th September, 2018, 12:30 AM
My bad, didn’t see it. I’ll try another way to see if I can get another pin off the same vin



What are you talking about? There is no other PIN for this 2002-2007 model hyundai coupe, Pin for this VIN is 650848. There are 3 possible problems:
1. Pin is changed in this car ECU/BCM
2. ECU/BCM is replaced from another car
3. You are using bad key programming tool and you are getting pin code incorrect error, it happened to me with SBB on this car. Use FVDI if you have, works great with this immo system

Rastanova
10th September, 2018, 01:04 AM
Dtip is right. I tried to see if I could get another one with the 2007 and up but it’ll show same old pin only. I’ve used 2000-2005 standard pin on some 2009 and up Nissans on rare occasions, so never discard the posibilites. Any way, dtip is correct. Also, you might be locked out and that’s why IMMO read incorrect pin.
1.- Battery 12v (Make sure, some assume)
2.-Look for IMMO light and check engine light to make sure there are no no-comm issues with the vehicle
3.-Check for codes and record them
4.-Erase codes, if any other than incorrect transponder ID, diagnose codes first
5.-Make sure you are using the correct transponder ID

If you do a scan and get DTC’s I can help you diagnose the vehicle.




Sent from my iPhone using Tapatalk

Rastanova
10th September, 2018, 01:08 AM
https://uploads.tapatalk-cdn.com/20180910/38431117a6c29eb1fb1b1c197cd549cd.jpg


Sent from my iPhone using Tapatalk

wissamshaat
10th September, 2018, 02:11 AM
i tried with fvdi and a original sbb same result

dtip
10th September, 2018, 02:15 PM
tiburons BCM is just processing point to immo which is in ECU (ecm) , i am afraid you will have to read ECU to get your pin code....