PDA

View Full Version : vw polo i.4 2003 model



gskuvarega
13th September, 2018, 12:13 PM
he
help needed please i need immo off for vw polo 1.4l 2003 model with magnet marelli 036906034ed iaw4mv.ed

Blayders
13th September, 2018, 07:43 PM
If i good remember only solution is immo emulator .

avital
14th September, 2018, 08:51 AM
For this type ECU, VAG3 CAN wfs emulator like this:
https://uploads.tapatalk-cdn.com/20180914/f08c0941adb5561f4e088f2541eed2b5.jpg


Wysłane z iPhone za pomocą Tapatalk

brend
14th September, 2018, 09:09 AM
Or put ecu eeprom to get login for swap.

cloviskit
3rd June, 2019, 11:08 AM
Hello

I have an ecu of the same type, 036906034ED, IAW4MV.ED

I connected an emulator from carlabimmo, and cut the 43 ecu pin wire, but that didn't start the car.
My emulator has +ve, -Ve and Signal line(K line).
My dashboard doesn't have the W line to be cut. How can I go about this immo issue?
Please help

avital
3rd June, 2019, 03:02 PM
Bad emulator , for WFS3 must use WFS3 emulator not WFS2 over W-LINE, see my photo in the post number # 3

AutoGeek
3rd June, 2019, 03:09 PM
he
help needed please i need immo off for vw polo 1.4l 2003 model with magnet marelli 036906034ed iaw4mv.ed

I HAVE WORKING IMMO OFF FILE FOR THAT..........

Lambda1
3rd June, 2019, 04:53 PM
Post flash and let magic happend.