PDA

View Full Version : milleage cbr600rr 2008


spantor
16th September, 2018, 11:02 PM
Hi.
Try to go down kilometers to a 2008 cbr600rr sling but I do not see any eeprom on the board. However, I have seen an NEC processor. Does anyone know pinout to be able to change kilometers to this model?
dtip
16th September, 2018, 11:44 PM
Mileage is not in NEC, it should be small TSSOP8 package 93c56 , somewhere above processor , look closer.
diagtech2000
17th September, 2018, 02:55 AM
post pictures if the board pal


Sent from my iPhone using Tapatalk
frankrayk
17th September, 2018, 01:42 PM
556760here........
spantor
17th September, 2018, 06:35 PM
556760here........

Could I connect digiprog 3 directly to the pinout of the images? works ?
frankrayk
17th September, 2018, 07:53 PM
You can use this pinout on any programmer as long as the programmer reads the circuit.
No need to connect wires from programmer 6 and 7, they are already connected together to 5 and 8 on the board.
spantor
17th September, 2018, 11:01 PM
[QUOTE=frankrayk;3373570]You can use this pinout on any programmer as long as the programmer reads the circuit.
No need to connect wires from programmer 6 and 7, they are already connected together to 5 and 8 on the board.[/Q

You're very nice, I have an old painting, maybe I'll make some attempt.
greetings and thanks