PDA

View Full Version : Used Ecu



Bdmjoe
17th September, 2018, 12:42 PM
Hi, members of DK I need help for adapt used Ecu ( Siemens 5wp4457) on seat Leon 1.6 petrol where’s best solution, year car is 1999 and attached photo https://uploads.tapatalk-cdn.com/20180917/4b2e7147efb0c1402a28839961fd939b.jpg
I have pin from dash but don’t connect to Ecu engine immobiliser cut’s k line.
Thanks



Sent from my iPhone using Tapatalk

Bdmjoe
17th September, 2018, 12:44 PM
Sorry , the old Ecu is destroyed



Sent from my iPhone using Tapatalk

figani
17th September, 2018, 03:54 PM
swap immo eprom from donor ecu to that one... when HW/SW is same...
or post dump from eeprom and search help for immo OFF...

morrisgauge
17th September, 2018, 09:04 PM
You may also check the immobilizer portion of the forum.

Bdmjoe
17th September, 2018, 10:34 PM
Ok Friends tomorrow post file eeprom for immo off



Sent from my iPhone using Tapatalk

Bdmjoe
18th September, 2018, 12:29 PM
Hi, Friends, today I read eeprom with xprog in 16bit (93c56farchild ) is correct? I attched file, is posible immoff, I think with julie emultor Works good, but I prefer with eprom solution,
thanks