ducati gt1000

[sv2hqx]

hi
can someone calculate to 9068
original 24879
908lj24

[datagaraj]

Hello
please try if cs eror remove tacho connect again

good luck

[sv2hqx]

Hello
please try if cs eror remove tacho connect again

good luck


solved
but this wont work
was the first i try

[Ducabrem]

what programmer do you do these readings with?
Thank you

[sv2hqx]

what programmer do you do these readings with?
Thank you
orange5 vvdi

[Ducabrem]

​Thanks, I want to get one

[Ducabrem]

Of this file could you get the key master ( red key ) or code card?

[DCT748]

yes because there is at least the 3 keys recorded in the memory, including the red

[DCT748]

someone has a good link to buy this orange5 ?
confirm that can read MC908JL24 or HC908JL24 ducati digitek ?
THX !!

[Ducabrem]

+1

Enviado desde mi Redmi Note 4 mediante Tapatalk

[sv2hqx]

someone has a good link to buy this orange5 ?
confirm that can read MC908JL24 or HC908JL24 ducati digitek ?
THX !!
you can buy original from scorpio

[DCT748]

ok I'll go see the site thx
should I buy an adapter?

[sv2hqx]

ok I'll go see the site thx
should I buy an adapter?

if you buy 908 license it will be included but its very simple to make by you self

[DCT748]

ok many thanks !

the wiring diagram is indicated in the software for this MCU ?

I found this picture but it is incomplete
https://www.digital-kaos.co.uk/forum...8&d=1525706132 (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=526568&d=1525706132)

[sv2hqx]

ok I'll go see the site thx
should I buy an adapter?

ducati yamaha same

[DCT748]

great thank you very much !!

[Ducabrem]

[QUOTE = DCT748; 3477826] ok muchas gracias!

¿El diagrama de cableado está indicado en el software para esta MCU?

Encontré esta imagen pero está incompleta
https://www.digital-kaos.co.uk/forum...8&d=1525706132 (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=526568&d=1525706132) [/ QUOTE]


DTC 748 ,have you bought orange 5? I bought xprogand licensed but i can not read.

[DCT748]

yes I buy orange 5 clone, but it's still in the box because I have not had the time to test ...
(I have not opened the box yet, I hope it's not too bad inside!)

[DCT748]

I wanted to test but without success, because I do not know the electronics of microchip, and I do not know where this cable connects .....
do you have the information please ?
thx

[Ducabrem]

I wanted to test but without success, because I do not know the electronics of microchip, and I do not know where this cable connects .....
do you have the information please ?
thxOSC1 , pin number 65 of the MC68HC08908LJ24


Enviado desde mi Redmi Note 4 mediante Tapatalk

[Ducabrem]

yes I buy orange 5 clone, but it's still in the box because I have not had the time to test ...
(I have not opened the box yet, I hope it's not too bad inside!)Clone? and the licenses for the M08V , for 908LJ 24?

Enviado desde mi Redmi Note 4 mediante Tapatalk

[DCT748]

ok thank you, I just tried, I connected the cable to OSC pin of orange5 and he managed to start reading the flash.
bad news the memory does not look good ....

for the license I do not know, where to buy this license? that's why reading is not good?

[DCT748]

I check I have the license M08V in the installation folder, so I think I have another problem for reading

[Ducabrem]

the OSC1 cable must be covered with a mesh connected to negative and as short as possible, as I read it is the most recommended. The Orange 5 clone, brings the active licenses? . I was about to buy it on the web http://www.scorpio-lk.com/eng_index/

Enviado desde mi Redmi Note 4 mediante Tapatalk

[DCT748]

I think I read ADADAD because I do not have the security code (SS code) but I do not understand because orange5 tells me that I have the license to search for the code, but I do not have the button "scan" to find it ....
either I'm doing something wrong or it's the fact that it's a bad clone

[DCT748]

good news :peaceful:

without really believing I tried to select the MC68HC908LK24 and then I saw that the scan button appeared !!
the SS code has been successfully read
I started reading and it worked I was able to recover the correct file.

for information apparently it is necessary at least version V1.34 to allow to have the button scan for this type of 908Lx24.
if you take a clone pay attention to that

[Ducabrem]

ohhhh, that's very good news, can you tell me purchase link, have you bought only hardware with software, without adapters? or do you need an extra adapter? by the way thank you very much for sharing

Enviado desde mi Redmi Note 4 mediante Tapatalk

[DCT748]

I bought here the complete set. there is the box OR5, the cd with software V1.34, and all the adapters

http://www.obd2diy.fr/wholesale/oem-orange5-professional-programming-device-with-basic-module.html

I think you can find this clone on other website can be cheaper.

think to manually install the driver and activate the license M08V by reading the PDF in the folder of the CD

as you can see in the pack there are several small cables to connect, but I do not like soldering, so I have other cables

I made myself a connector like this in picture

those who find it useful press the thanks button :peaceful:

[Kocta]

hi, can send photo plugged in?
thank you very much

[DCT748]

here is the picture, the cable alone (orange) is the one that goes to the OSC pin
no need to solder, you have to hold the cable by hand during the reading

[Kocta]

596659 rxd - ???
irg - ??? oranre 5

[sv2hqx]

v10v
present on connection manual

[Kocta]

[QUOTE = sv2hqx; 3503966] v10v
přítomen v příručce připojení [/ QUOTE]


Hi, I did not have it. You can send her.
Thank you very much

[sv2hqx]

[QUOTE = sv2hqx; 3503966] v10v
přítomen v příručce připojení [/ QUOTE]


Hi, I did not have it. You can send her.
Thank you very much

info button

[bob1620]

ORANGE 5 WHICH COMPANY IS GOOD
http://www.scorpio-lk.com/eng_index/

https://lacartech.com/products/orange-5-full-set-in-case

HAVE GOOD SUPPORT TECH
THANKS

[DCT748]

solved
but this wont work
was the first i try


I would like to know how to modify the mileage, please can you post the solution of your file @svhqx or other ?
or even better, tell me how to do it :peaceful::peaceful::peaceful:
Thank you a lot !