Peugeot 508 2012 crash

[impolis]

Hi everyone!

Your help needed!

Crash

Peugeot 508, 2012


Airbag module 9677910680, Continental


EEPROM 95640




Thanks in advance!

[diagprog]

hi
try............

[goblincalm]

Your cleared tested file ...

[impolis]

Hi, can you plz resend password? I keep getting message about wrong checksum..

[impolis]

Update

I keep getting an error B1003 - Secure configuration fault (Absence of calibration). I wasn't able to open the file from diagprog so I don't know if it was good or not. I got the same file as from goblincalm from various sources, free and paid ones and I generated exactly the same file myself and some of my fellows who know more than me told me that it can be a hardware fault. So, I've ordered a replacement ECU. Today it arrived, and guess what? Right! The same B1003! Now I'm really stuck and beg for help!

[mikedemirjian]

What scan tool are you using? obviously you have a calibration fault, someone with PeugeotPlanet scanner can calibrate it for you.

[impolis]

Diagbox, Launch, Abrites. I'll ask about Peugeot Planet.

[impolis]

There are some calibration data somewhere in the dump an it's gone while clearing. It would be great to find where.

[mikedemirjian]

Open the cleared crash file and check on line 400-410 if the vin number is present. i cannot access your cleared files since they have a password.

[impolis]

Thanks for your reply, yes indeed the correct VIN is in every file I've tried

[impolis]

I mean, I got 6 identical files from various sources, which are like goblincalm sent me (it has no password). They are modified the same way.

[mikedemirjian]

The software i use made a very slight modification comparing to the file that goblincalm sent you. give it a try if you want.

[mikedemirjian]

Any news?...

[Safetybags]

try and report, must work....
if not work you have an hardware problem, or other problem on the car friend....
this file was tested on car by me.
BR

[impolis]

mikedmirjian, Unfortunately, it didn't work also..

Safetybags, thank you, I gonna try this right away!

[impolis]

Safetybags, there are no DTC's anymore but the unit remains definitively locked..

[mikedemirjian]

Check in the special functions of your scan tool, there should be the option to unlock the module

[impolis]

There are two locking types, aftermarket, which I am able to change, and definitive, that I have no access to.

[impolis]

Messing with dump now, anyway, it's much closer to desirable than before :)

[mikedemirjian]

Best of luck mate, let us know how it goes

[mikedemirjian]

I just found another file mate and i have big big thoughts that this one should work. give it a try if you want, ill send you the pass in pm.

[Safetybags]

The file you posted, are the original one?!? No one changed parameters before you read dump??
Already cleared someone’s with same part number, and all ok...
Want you I send one of this dumps and you change only vin?..
BR


Enviado do meu iPhone usando o Tapatalk

[Safetybags]

hi, try this one, its other file, cleared and tested 100%. only changed vin for your vin..
BR
and good luck.

[CHIKO]

HI YOUR CLEAR
GOOD LCUK

[impolis]

Thank you guys for your help!

Today I didn't try anything yet

Safetybags, I cannot guarantee that no one has messed up with any kind of scanner tool before me. The EEPROM itself was intact, covered with thick layer of original lacquer. We've got another module, which also used to be with crash data in it, both modules behave the same way. Now I have only 39 bytes left under suspicion. I will report later

Again, Thank you so much for your help and support guys! Much appreciated!

[Abdo Abdelatif]

hello: scan the other ecu:

[Abdo Abdelatif]

hello: scan the other ecu: BSI -CONTROLE MOTEUR- AIRBAG.
POSTED ERREUR

[impolis]

Errors in BSI - only absence of communication with SRS ecu (temporary)

[Abdo Abdelatif]

p 508 is cleard: passe via pm
HI YOUR vin:
VF38E9HL0CL026134