Bosch RCD310 1K0035186AN

[hrmotorsport]

Hi all, i read dump from 95128. can somebody calc code?

thanks

[shooting]

Hi all, i read dump from 95128. can somebody calc code?

thanks

2 problems..... first your dump is corrupt..... second you need NEC processor too for code

wbr

[hrmotorsport]

thanks, the i need read it

[hrmotorsport]

hi i read again 95128, how i can read nec? i have smok, xprog, orange5..

i have carprog original and cant read code, appears button disabled. why?

thanks

[richiebb]

hi i read again 95128, how i can read nec? i have smok, xprog, orange5..

i have carprog original and cant read code, appears button disabled. why?

thanks

pin out for orange5

560640

[hrmotorsport]

thanks but this board is not same as picture

[richiebb]

thanks but this board is not same as picture

post label or board photo

[hrmotorsport]

Here is it, thankshttps://uploads.tapatalk-cdn.com/20181001/99a63a733e3bd104e4ca79a964cbaf67.jpg

Enviado desde mi ALP-L09 mediante Tapatalk

[richiebb]

here..............

560655

Connect the radio to the power supply............... unit power off

[hrmotorsport]

wow, my orange5 is original and not have this activation.. s*it

[hrmotorsport]

can i use smok programmer? i have this activation, cable is this

[richiebb]

can i use smok programmer? i have this activation, cable is this

maybe I do not know that programmer, use UART connections

[richiebb]

560662

do not connect VDD
everything else is the same except for FLMDO ......................... I suppose it's PDX

[hrmotorsport]

amd radio is needed conect to +12v and gnd? pin 15 +12 and 12 GND ?

i have too upa-s

[richiebb]

amd radio is needed conect to +12v and gnd? pin 15 +12 and 12 GND ?

i have too upa-s

Connect the radio to the power supply............... unit power off

[hrmotorsport]

i think i cant read it with this tools. all errors.

its possible make a cable with standard usb cable ? and what program?

[richiebb]

i think i cant read it with this tools. all errors.

its possible make a cable with standard usb cable ? and what program?

You can built a NEC Reader (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=548106&d=1533840860)

[richiebb]

OR.................... can use two digits method (http://www.digital-kaos.co.uk/forums/showthread.php/379014-RCD310-510-BLAUPUNKT-BOSCH-Algo-FIRST-2-digits)

[hrmotorsport]

But two digits method i dont understand. Can you help me to do ?

And problem its is needed test xx01 xx02 xx03.. ?

Enviado desde mi ALP-L09 mediante Tapatalk

[richiebb]

read PDF in thread.

1. read ori eeprom and save
2. fill with FF from 0xAE0 to 0xCCF then save en turn radio on
3 read eeprom again and save

upload here dump 1 and 3

[hrmotorsport]

I will try use old z3x box to read nec.

ThNkshttps://uploads.tapatalk-cdn.com/20181002/7e144504d0e6446ce0df18ba5bcb40f9.jpg

Enviado desde mi ALP-L09 mediante Tapatalk

[hrmotorsport]

Hi, here is dump ori and decryptted

thanks

[petronijul]

first two digit is 06xx

[hrmotorsport]

finally somebody that found customer only with serial provide serial, was 0613..