View Full Version : BMW EDC17C06 ecu corrupted
auto techniek
29th September, 2018, 04:03 PM
Hi
Can someone check this ECU file
EDC17C06 from BMW Serie 1 N47 from 2009.
Can does not start after doing dpf off. Backup file also does not work.
bobolin4o
29th September, 2018, 04:07 PM
And which errors are shown with diagnosis?
smirnoff_rules
29th September, 2018, 04:08 PM
did you write over obd ?
auto techniek
29th September, 2018, 05:00 PM
yes did write over obd.
I connected now with bootload and need to write the files back
I read with bootloader and get message error checksum
Here the file I read with bootloader
voltechcar
29th September, 2018, 05:37 PM
you edit be obd so you lock ecu, simple.
auto techniek
29th September, 2018, 05:38 PM
ok.
i need to unlock the ecu?
with ktag/kess?
any one has a dump for this car?
voltechcar
29th September, 2018, 06:56 PM
ecu have otp when you edit file ( obd) and write to ecu by obd you lock ecu. Use ista to reprograming and read cpu in boot
vrsho
29th September, 2018, 07:07 PM
Did you tried to write the original backup on bench?
auto techniek
29th September, 2018, 07:17 PM
Why i can read/write the ecu eeprom with ktag in boot ?
But can t read/write micro tc1766 maps.
AVDigitale
29th September, 2018, 07:30 PM
if you like to start the car need to read eeprom and to be repaired
auto techniek
29th September, 2018, 08:33 PM
Can someone repair the eeprom pls?
I ve already posted.
AVDigitale
29th September, 2018, 10:01 PM
read and post
auto techniek
29th September, 2018, 10:51 PM
Here two files.
One did read with obd and one with boot.
AVDigitale
29th September, 2018, 11:30 PM
post and eeprom too ,not just a flash from boot
auto techniek
30th September, 2018, 08:59 AM
This is what i get when read with ktag in boot.
Do i need to read the eeprom separatly?
Babos
30th September, 2018, 09:01 AM
Here two files.
One did read with obd and one with boot.
post here boot bin dump(flash only)
smirnoff_rules
30th September, 2018, 09:10 AM
only tp area is corrupted , if you have no luck find a x17 owner it repairs these over obd with vr file as it writes full file
auto techniek
30th September, 2018, 09:11 AM
post here boot bin dump(flash only)How to read? With ktag i can only read eeprom in boot.
I get only one file when make backup of ecu?
sdtsedat
30th September, 2018, 02:00 PM
read full and post all files here
sdtsedat
30th September, 2018, 02:37 PM
Select backup and read full and at the end you need press YES
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.