PDA

View Full Version : OBD Flasher tools 2018



grezlo
1st October, 2018, 12:21 PM
Hello colleagues!

I would like to show you the tools we use in Russia with chip tuning. BitBox/Edit, PCMFlash, MMCFlash.
The modular structure and low prices allow us to work with many new cars, such as BMW Fxx or VAG UDS. I do not want it to be advertising, just like technical support and will answer you any questions.

http://www.remaptools.com/

Latest news:
BitBox 3.0.7 rev5
Now BMW Fxx/Gxx Bosch MD1/MG1 tested, released and now available for purchase!
Package BMW Full CAN+ENET is now available. For BMW Exx customers discount for purchasing BMW Fxx now is disabled.
New families:
– Delphi MT86 with reading/writing and checksums correction available in module Kia/Hyundai Petrol CAN.
– China Bosch ME7.8.8 CAN now available with virtual reading/writing and checksums correction in module China Bosch Petrol.

PCMFlash 1.1.96
Added new Module 67 – Nissan Bosch ME7. Work with ECU Bosch ME7.9.20 on Nissan X-Trail T31 2.5L.
In Module 24 – Mitsubishi CAN-bus added support:
Eclipse Cross (2018-) (MH8601/4MB) [RD/WR/CK]
In Module 35 – Toyota/Lexus/Scion/Hino added support:
76F0038/39/40/70/85, MPC565/SH72512/SH72544 CAN-bus [WR/CK]
In Module 36 – Kia/Hyundai EDC17 added support:
2.2L CRDI (EDC17C57) [Unlocked] [RD/WR/CK] write after unlock via BSL (Module 53)
In Module 59 – Renault/Nissan UDS added support:
1.5L, 2.3L dCi SID310 UDS (TC1791/3MB) [RD/WR/CK]
In Module 7 – Ford Transit/Tourneo/Ranger, Land Rover Defender added support:
Ford Transit: 2.2L Diesel (SID211) [Unlocked] [WR/CK] Write after unlocking in BSL (Module 53)




If it's forbidden, tell me I'll delete it. Thank you!

mexanico1971
2nd October, 2018, 01:44 AM
Hi
What early D4D is possible to read MCU width Module Toyota Denso Gen1 CAN ?!
is possible in 1CD-FTV engines ?

Thank"s in advance
Best regards

grezlo
3rd October, 2018, 01:40 AM
Hello! No solution for read from ECU. But BitBox has virtual read for it. https://www.remaptools.com/?product=module-toyota-denso-gen1-can

Or if you have ori file, can use PCMFlash
https://www.remaptools.com/?product=module-35-toyotalexusscionhino

moky
3rd October, 2018, 06:54 AM
module bitbox virtual read for originals files is a good complement for pcmflash

voltechcar
3rd October, 2018, 07:32 AM
all is ok but 80% is VR Read, so what when function recovery not help when ecu not response? We edit Hitashi ecu in Subaru and must buy next ecu when he not response. Tool works great but I not use him when I must tested beta file.

grezlo
3rd October, 2018, 05:48 PM
all is ok but 80% is VR Read, so what when function recovery not help when ecu not response? We edit Hitashi ecu in Subaru and must buy next ecu when he not response. Tool works great but I not use him when I must tested beta file.

You tried use PCMFlash for it? Or BitBox only?

cantontech
8th October, 2018, 09:21 AM
Thanks Grezlo.

Can we do with bitbox flasher Chrysler voyager 3.5 2002 ?
Can we do with mmc flasher Renault/Dacia dokker 2016 with ems3125 ?

rh03
8th October, 2018, 07:00 PM
pcm flash look like interesting, especially dsg module, but what hardware I need to read and write mqb dsg on boot mode?


I have genuine tactrix 2.0

grezlo
9th October, 2018, 06:04 PM
pcm flash look like interesting, especially dsg module, but what hardware I need to read and write mqb dsg on boot mode?


I have genuine tactrix 2.0

The module: https://www.remaptools.com/?product=module-58-vag-dsgcvt

Need any J2534, Tactrix Open Port 2.0 full work with it. You can look instruction: http://www.remaptools.com/?p=937

Password on request in PM.

grezlo
9th October, 2018, 06:14 PM
Thanks Grezlo.

Can we do with bitbox flasher Chrysler voyager 3.5 2002 ?
Can we do with mmc flasher Renault/Dacia dokker 2016 with ems3125 ?




1) No way with Chrysler voyager 3.5 2002, old ECU.
2) This car not tested, but i think will be ok, because same ECU with Duster EMS3125. MMC and PCM support it.

rh03
9th October, 2018, 08:20 PM
thank you for answer my friend :)

moky
9th October, 2018, 09:00 PM
I saw on other website mmcflasher sell module 41 for bmw F cheaper because in test now..have you got infos on it if serious work?

thanks

grezlo
9th October, 2018, 09:31 PM
I saw on other website mmcflasher sell module 41 for bmw F cheaper because in test now..have you got infos on it if serious work?

thanks

Checked with developer now. It FINAL TEST version. Dont work CVN correction, but useable if this DTC to off from mask.
He working on solution. For this reason, now at a discount.

The module is online: https://www.remaptools.com/?product=module-41-bmw-bosch-f-series-e-net-final-test

bk59
18th November, 2018, 06:08 AM
Hello,

Has anybody already used module58 of PCMFlash for reading/writing dsg ? On dq500, OBD read works?

grezlo
10th December, 2018, 09:04 PM
Hello,

Has anybody already used module58 of PCMFlash for reading/writing dsg ? On dq500, OBD read works?

Hello! Sure, full work! Sorry missed you message.

https://www.remaptools.com/?product=module-58-vag-dsgcvt

If you need, will give you pass for instruction in PM.

grezlo
10th December, 2018, 09:18 PM
Very important news for Mercedes specialists:

BitBox new module! MB Bosch EDC17 via OBD CAN (https://www.remaptools.com/?product=module-mb-bosch-edc17-can)

MB Bosch EDC17CP01/CP10 – supports real reading/writing and checksums calculation. Writing of calibrations area only.
MB Bosch EDC17CP46 – supports real reading/writing and checksums calculation. Writing of calibrations area only.
MB Bosch EDC17CP57/CP60/C66 – supports real reading/writing and checksums calculation. Writing of calibrations area only.

https://www.remaptools.com/

grezlo
12th December, 2018, 08:35 AM
Latest news from PCMFlash:

PCMFlash 1.1.98 (https://yadi.sk/d/rXzOOehuijOWTQ)

Added new Module 69 – Mercedes-Benz MED17/EDC17 (https://www.remaptools.com/?product=mercedes-benz-med17-edc17). Read/Write Mercedes via OBD for 182EUR!
Added new Module 68 – JLR Denso (https://www.remaptools.com/?product=module-68-jlr-denso)
Added new Module 70 – Jeep EDC17 (https://www.remaptools.com/?product=module-69-jeep-edc17)

3abas27
17th December, 2018, 08:57 PM
Hi
Edc17 new obd sollution which best pcmflash or bitbox?

redline974
17th December, 2018, 09:08 PM
I use PCM Flash with all Vag modules! it work very goot, tested on few VAG car, last car is VW Golf 2018 1.4 TSI 150ps ME17.5.26
Writing 5minutes ! Very with this tool !

Maartinj
18th December, 2018, 06:21 AM
I use PCM Flash with all Vag modules! it work very goot, tested on few VAG car, last car is VW Golf 2018 1.4 TSI 150ps ME17.5.26
Writing 5minutes ! Very with this tool !

this is not 2018 ...is old one 2014-2017 (04E.........)
Reall 2018 is MG1CS011 Motronic - for Golf 7 FL, Arteon etc 05E907309 (0261S16449)
this is a question, if can read or not ,
can be read too ?

Also can not see any EDC17C46 or latest C64
They not supporting too ?

masterb
18th December, 2018, 09:14 PM
Module 50
VAG EDC17CP44, EDC17C46, EDC17C64

2.0L, 3.0L TDI (EDC17CP04/EDC17CP14/EDC17CP20/EDC17CP24)
3.0L TDI (EDC17CP44)
4.2L TDI (EDC17CP24/EDC17CP44)
2.0L TDI (EDC17C46)
2.0L TDI (EDC17C54)
1.6L, 2.0L TDI (EDC17C64)
2.0L TDI (EDC17C74)
3.0L TDI (EDC17CP54)
Virtual reading, writing, checksum correction.

green1
24th December, 2018, 01:34 PM
Nice updates, keep them coming please ,

auto techniek
24th December, 2018, 06:48 PM
Is there a full version of PCM Flash?

grezlo
26th December, 2018, 07:02 PM
Hi
Edc17 new obd sollution which best pcmflash or bitbox?

MB EDC17 same work on BitBox and PCM. PCM supports gas and diesel MB in one module.

grezlo
26th December, 2018, 07:08 PM
this is not 2018 ...is old one 2014-2017 (04E.........)
Reall 2018 is MG1CS011 Motronic - for Golf 7 FL, Arteon etc 05E907309 (0261S16449)
this is a question, if can read or not ,
can be read too ?

Also can not see any EDC17C46 or latest C64
They not supporting too ?

MD1/MG1 VAG not supported by any tools as far as I know.

EDC17 VAG: https://www.remaptools.com/?product=module-4950-vag-edc17-uds

grezlo
26th December, 2018, 07:15 PM
Good news! We have New Year sale! :)

Coupons:
bitb2018 - 15% discount for all modules BitBox/Edit
pcm2018 - 10% discount for all modules PCMFlash

On our site: https://www.remaptools.com/

I can answer for you by WhatsApp +79272079270, or email info@remaptools.com.

grezlo
31st December, 2018, 03:08 PM
Happy New Year colleagues!


BitBox 3.1.2 rev4
New modules:


MB Bosch MED17 CAN (https://www.remaptools.com/?product=module-mb-bosch-med17-can)now released with following families:


MB Bosch MED17.7.2 with virtual reading, writing and checksums calculation
MB Bosch MED17.7.1/MED17.7.3 with virtual reading, writing and checksums calculation
MB Bosch MED17.7.3.1 with virtual reading, writing and checksums calculation
and this list will be updated as soon as possible to support all MED17 ECUs


New families:


Ford Bosch EDC17CV41 added to Trucks/Industrial Bosch EDC17CV41 module in test mode
FCA Bosch EDC17C49/C79 Bench reading family added for reading and checking files on bench when virtual reading file is not available on server!
Bosch EDC17C43 support added to MB Bosch EDC17 CAN module with reading/writing and checksums calculation



Improvements and fixes in families:


Fixed writing of some Hyundai DMCI types of ECU.
Fixed writing of Toyota Denso Gen1 TCM in some cases
MB Bosch EDC17CP10 added reading of new ECU type

https://www.remaptools.com/

masterb
1st January, 2019, 10:09 AM
hi grezlo,

can you give pw in pm.

thx

BABIGE
4th January, 2019, 09:24 PM
Please can send me password

Master8
8th January, 2019, 07:43 PM
password for what guys ???

jyck
12th January, 2019, 01:15 PM
Hi all, has anyone tested bitbox on BMW MD1 ecu? Looking for a tool for personal use (3 BMW cars) and I don't want to spend as much as the bflash/autotuner/cmd tools price for just a few cars.

Thanks

ionnutz
20th January, 2019, 10:05 PM
Hello!
Did anyone use mmc flasher on F series to the end? I managed to do a wirtual lead and the app saves the bin file and a cafd file. The app also has 2 options to write the bin file and also you can write the cafd file and also a checksum button. How do I write the modified file to the car? Do I do a checksum and then press only the write button? Do I just press the write button? What do I do with the cafd file?
Thanks!

heteromies
3rd February, 2019, 08:35 PM
How bitbox working with Exx?

jyck
16th February, 2019, 12:38 PM
Hi, no one has tried this tool??

markony79
8th March, 2019, 11:18 PM
just need enet cable , and dongle from company , and pay 1100eu , and can work without errors ..For bmw cars, not need boot mode, not ecu out, not soldering

read ID , and get original software from bmw server .... and just downloaded

markony79
8th March, 2019, 11:19 PM
then can use which tune or modificated software , and write it , cks is allready there with write on obd

jyck
10th March, 2019, 07:57 PM
then can use which tune or modificated software , and write it , cks is allready there with write on obd

thanks @markony79, have you used the tool? The operation mode seems easy, but I have not found anynone that have used this tool before and I would like hear some experiences before I acquire it.

Thanks!

hesham10
10th March, 2019, 09:18 PM
password for what guys ???
for instructions in links by grezlo

grezlo
29th April, 2019, 09:57 AM
Hello colleagues! Some news from Russia.

BitBox 3.1.7 rev1


New modules:


MB Siemens/Continental SIM271 (https://www.remaptools.com/?product=module-mb-siemens-continental-sim271) added with 2 families:


Continental SIM271DE2.0 TC1796 with bench reading/writing and checksum calculation
Siemens SIM271KE2.0 TC1796 with bench reading/writing and checksum calculation
Tested and works on vehicle. No need to dismount ECU and work on the bench. Full OBD2 solution.


New families:


Kia/Hyundai Continental SIM2K-260 TC1791 added to module Kia/Hyundai Continental SIM2K-25x/26x (https://www.remaptools.com/?product=module-kia-hyundai-continental-sim2k-25x-26x).
For this family BITS001 adapter required!
BMW Exx Bosch MEVD17.2.9 added to module BMW Exx Bosch CAN (https://www.remaptools.com/?product=module-bmw-exx-bosch-diesel-can-presale) with virtual reading/writing and checksum calculation.
SsangYong Delphi DCM6.2AP-6D with new MCU added to SsangYong Delphi Diesel (https://www.remaptools.com/?product=module-ssangyong-delphi-diesel) with read/write and checksums correction.
Fixes and improvements:


PSA Delphi DCM6.2A now made full flash reading
Fixed writing start for MB MED17 families
Toyota Denso Gen3 CAN (https://www.remaptools.com/?product=module-toyota-denso-gen3-can) now supports more variations of Denso and Fujitsu Ten ECUs.
Various UI fixes and improvements



Master/Slave


CVN fix for Toyota made when Master creating file for slave
Slave now can write original file without Master, if file was read from vehicle.

https://www.remaptools.com/

grezlo
14th June, 2019, 12:10 PM
Hello guys! :) News!

BitBox 3.1.8


New modules:
MB Delphi Diesel CAN (https://www.remaptools.com/?product=module-mb-delphi-diesel-can) with Delphi CRD3.XX family with reading/writing and checksum calculation
Trucks Delphi ETC3 CAN (https://www.remaptools.com/?product=module-trucks-delphi-etc3) with 2 families :
DAF/Industrial Delphi ETC3 (FID: 220)
Hyundai Delphi ETC3 (FID: 221) /TEST/


New families:
China Bosch ME17.8.8 SAIC added to China Bosch Petrol module (https://www.remaptools.com/?product=module-china-petrol)
MB Bosch MED17.7.5 (FID:215) added to module MB Bosch MED17 CAN (https://www.remaptools.com/?product=module-mb-bosch-med17-can)

Family improvements:
GPEC2A 2018+ writing algorithm remade, now writing flash and maps and fix P1400 problem. New protection removal patch
GPEC3 HW2 finally tested and remove protection now works!
Sim2K-25X, Sim2K-260, Sim271 made reading flash and maps data for valid checksums patch
Added detection of Gen2 (new protection) for ACDelco modules
Fixed and improvements:


Unlicensed identification released. Now you can do module identification even when module is not purchased. In some cases identification will be reduced.
Master/Slave system fixes
China Bosch ME17.8.8 (FID:60) fixed authentication issue

You can call or write to me WhatsApp +79272079270
https://www.remaptools.com/

Good luck for all! :)

ptikkala
31st August, 2019, 07:26 PM
How is PCMFLASH for VAG EDC17 units? What hardware do you guys use for it?

Bitbox works great for F series BMWs. Is there support coming for VAG EDC17 on Bitbox?

teerak2uk
31st August, 2019, 07:33 PM
How is PCMFLASH for VAG EDC17 units? What hardware do you guys use for it?

Bitbox works great for F series BMWs. Is there support coming for VAG EDC17 on Bitbox?Does vr and bench & boot depends on modules purchased

figani
31st August, 2019, 07:34 PM
How is PCMFLASH for VAG EDC17 units? What hardware do you guys use for it?


I use Openport and Scanmatik...
Without any issues...

teerak2uk
31st August, 2019, 08:29 PM
I use Openport and Scanmatik...
Without any issues...Why openport scanmatik replaces it

ptikkala
1st September, 2019, 07:54 AM
Scanmatik2 Pro?

figani
1st September, 2019, 08:34 AM
Why openport scanmatik replaces it


Mistake....
Have boths...
And you are right, need only one...

And yes, Scanmatik 2 pro...
Newer device, more possibilities...

juse
4th October, 2019, 12:56 AM
Hello! Can vag cars with ecus mentioned in module 50 be done via OBD only?

figani
4th October, 2019, 07:55 AM
Hello! Can vag cars with ecus mentioned in module 50 be done via OBD only?

In VAG cars...?
Friend there are so many different Ecu's...
And manufacturers...
Bosch, Delphi, Continental, Siemens.....
Be more specific....

juse
4th October, 2019, 11:23 AM
Ment the pcmflash module5ä 50, for edc17. Ecus are listed and told vr, write and checksum

figani
4th October, 2019, 11:52 AM
Ment the pcmflash module5ä 50, for edc17. Ecus are listed and told vr, write and checksum


check also modul 65...
it´s also MEDC17 VR VAG cars...

juse
4th October, 2019, 05:10 PM
check also modul 65...
it´s also MEDC17 VR VAG cars...

Oh, i see, there is no carlist anywhere?

teerak2uk
4th October, 2019, 06:13 PM
Oh, i see, there is no carlist anywhere?No only makes and ECU model/mcu

caja88
2nd December, 2019, 11:02 PM
The module: https://www.remaptools.com/?product=module-58-vag-dsgcvt

Need any J2534, Tactrix Open Port 2.0 full work with it. You can look instruction: http://www.remaptools.com/?p=937

Password on request in PM.

Also works with China tools?

figani
3rd December, 2019, 08:05 AM
Also works with China tools?

if quality is good, why not...

caja88
3rd December, 2019, 05:22 PM
if quality is good, why not...

So I buy a tactrix open port clone, pcm flash module 65 and I can write edc17 over obd, tprot?

figani
3rd December, 2019, 05:40 PM
So I buy a tactrix open port clone, pcm flash module 65 and I can write edc17 over obd, tprot?

pcmflash sw dont check if you use clone or ori, so theoretically yes...
install your drivers...
and start...

as I wrote post before, and practically success will also depend of quality of clone...

nunorgp
18th January, 2020, 07:14 PM
Just want to leave my negative experience/review with mmc flasher for the BMW F series and their support.

Used it to read my bmw 520d 2013/12 EUR6 EDC17_50 , read fine ... and also wrote fine ... problem was that the ecu counter went from 2 to 60 ( 60=max) on the very first write. Connclusion , I cannot write anymore to the ecu, have to find some tools or someone to reset the counter for me ... Their support didnt want to take the responsibility for it as they just stopped replying to my emails ... So on my experience mmcflasher it is a big no go .

Anyone here know how can I reset the counter ?

flag
18th January, 2020, 07:24 PM
indeed the Rusian people are the best peoples in the world but i hate Rusian programmer tools because cost very very very much. for each ecu cost around 250 euro. better is to buy autotuner free update, or flex. is better and cheaper. good and faster support . with rusian tools you should to buy, buy, buy buy softwares, if you do an calculate, in the end.........not have end you just to buy again:D:D:D:D:D

and after you are tired from buyer softwares , you should to buy again :D. viva china and italian tools. i sm waiting from china that will launches into the market a tool for 300-400 usd full and online working.

simply, doesn't worth Rusian tools.

whalla
9th May, 2020, 02:03 PM
Mistake....
Have boths...
And you are right, need only one...

And yes, Scanmatik 2 pro...
Newer device, more possibilities...

Is sanmatic2 pro better than mongoose pro?


Sent from my iPhone using Tapatalk

teerak2uk
10th May, 2020, 09:05 AM
Is sanmatic2 pro better than mongoose pro?


Sent from my iPhone using TapatalkYes 100%. .

gljuk
19th May, 2020, 12:51 PM
Flag,
The good thing about these separate licences is that you can buy only these licences, that you need. You don't have to buy all the stuff you do not use! I really wanted Flex. It's good tool with support and updates, but, the tool with OBD licence is 3+kEUR, then you have to pay for subscriptions every year. I am not so active in ECU remap business, so i'd go with flashers where i can buy 1-2-3 licences and it would cover 95% of my needs.