View Full Version : 0281012462 edc15c2 PEUGEOT 807 need ori flash
Pyromaniak
4th October, 2018, 03:07 PM
Hi friends!
I need original flash to bosch edc15c2 ecu ecu nr:0281012462
Its from 807 Peugeot Model Year 2005
This ecu is also fitted in C8 Citroen
Thanks in advance :rangers2:
kinketotua
4th October, 2018, 03:24 PM
Here friend
Pyromaniak
7th October, 2018, 04:42 PM
Friends working fine, but i have dtc P0221 Code Definition Throttle/Pedal Position Sensor/Switch B Circuit Range/Performance problem
Is possible to off this dtc? Can someone do it for me?
Car wont turn over 3000 rpm. But in lexia i see normal percentual increase from accelerator pedal.
Many thanks i advance
spirky
7th October, 2018, 05:01 PM
Hi,
Try this file, chk ok
Pass MP
Br
Pyromaniak
7th October, 2018, 05:15 PM
Thanks mate i will test tomorrow and send you report if working or not.
Pyromaniak
8th October, 2018, 09:31 AM
Hi Spirky, you file working, dtc is off, but i have with car problem with 1184 rpm idle and car not turn over 3100 rpm
(idle and max rpm are same like before your file)
I swaped ecu in this car, but have not same number (its imposible same number ecu buy)
Car have another dtc P0530 (aircond pressure signal--- its broken wires--- i dont need this dtc off)
Please have someone experience with this? I need normal idle and rpm over 3000
What can i do for it?
Thanks friends for helps! DK BEST!!
edit: This car have electronic accelerator pedal unit (have not two potenciometers inside)
Car in lexia shows normal percentual increase if i press accel 0-99%
raceshadow
8th October, 2018, 11:32 AM
Hi friends!
I need original flash to bosch edc15c2 ecu ecu nr:0281012462
Its from 807 Peugeot Model Year 2005
This ecu is also fitted in C8 Citroen
Thanks in advance :rangers2:
Try this.......
Pyromaniak
8th October, 2018, 01:22 PM
Try this.......
Thank you mate, I have this file too (from post 2) I have problem with this car Post 6
Pyromaniak
11th October, 2018, 12:27 PM
SOLVED :coat: :D My problem is in Infineon
I must change it from old ecu---- is posible to read infineon in ecu?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.