View Full Version : Great Wall Florid Battery drain p1614
Patrick190e
7th October, 2018, 07:31 AM
hi guys
i have a great wall florid on my friends workshop and he are making paint and stuff... they took of the battery for a few weeks and when he tryed to start it won't...
P1614 stay on... no blinking check engine.
ecu: BOSCH ME 7.8.8 MOTRONIC F 01R 00D 724 3612100-EG01
this car have an immobox hiden somewhere... the keys are the originals and we have 2 of them.
I read in a russian forum that is a common problem with this china cars... so can i repair that car?... i have a tl866 and a FGtech galleto... inside of ecu i found a 95080 but i won't touch the ecu and make a mess.
thanks everyone.
rex89
7th October, 2018, 09:52 AM
hello mate , read and post file here flash+eep if possible we turn it to immo off for u
Patrick190e
7th October, 2018, 07:39 PM
oh hi and thanks for the repy... i dont really know how to read this ecu, i see the 95080 but this ecu dont have flash... is there any way to read the procesor? its a ST one
klaudio
8th October, 2018, 08:53 PM
great wall you need to clear immo dtc, try that first, some of them you need a pin code to clear.
Patrick190e
9th October, 2018, 04:47 PM
great wall you need to clear immo dtc, try that first, some of them you need a pin code to clear.
how can i do that klaudio???
klaudio
9th October, 2018, 08:54 PM
my scanner could do that, launch, xtool
Patrick190e
10th October, 2018, 12:40 AM
ohh i have launch x431, i read the codes and try to clear it, but still not start the engine, P1614 remains and the VIN still ================= (no vin)
klaudio
10th October, 2018, 12:53 AM
did you try reprogramming key?
Patrick190e
10th October, 2018, 03:30 AM
my scanner dont have the option... i mean, i dont have the equipament for reprogram a key
klaudio
10th October, 2018, 09:32 PM
my scanner dont have the option... i mean, i dont have the equipament for reprogram a key
I think launch x431 might have the option to program, i think it will ask for pin, go to immobilizer option on it.
Patrick190e
11th October, 2018, 03:28 PM
what about the VIN problem... is the no vin a problem??? because i can read the vin and everytime i read says ================
klaudio
11th October, 2018, 08:56 PM
not sure why is not reading vin#, check fuses, maybe is not communicating with immo box, haven't done that many GW, has been a while. I think launch will it let you get into the system without vin#.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.