Toyota Land Cruiser

[Bdmjoe]

Hi, Members of Dk , I need, where is the eprom in this unit from Toyota I attached fotos. https://uploads.tapatalk-cdn.com/20181008/315644c37c77947e336f0b464d297994.jpghttps://uploads.tapatalk-cdn.com/20181008/6b3ec2068dd72a89e4cc02189da0bd85.jpg

Thanks in advance


Sent from my iPhone using Tapatalk

[Bdmjoe]

Sorry the car is TOYOTA land cruiser year 2016



Sent from my iPhone using Tapatalk

[fathijarmoukli]

NO NEED TO SWAP THE EPROM
JUST PLUG THE MODULE THEN SHORT THE OBD PINS 4-13 TOGETHER AND TURN THE SWITCH ON
THE DASH LIGHTS WILL START FLASHING
LEAVE THE SWITCH ON FOR 30 MIN THEN TURN THE SWITCH OFF AND UNSHORT THE OBD PINS AND START THE CAR

[Bdmjoe]

Hi, I try this way yesterday but don’t. Succes, the steering lock are locked , this car are all key lost, are generated one key and now I have 15 signal on dash, I try synchro, Ecu engine, steering lock smart key and immo with tango software,



Sent from my iPhone using Tapatalk

[Bdmjoe]

Is correct this proced?


Sent from my iPhone using Tapatalk

[fathijarmoukli]

how did you program the key to the smart module??
and does the car crank now or not ??

[Bdmjoe]

Hi, the car don’t start but only connect ignition and dash light on



Sent from my iPhone using Tapatalk

[Bdmjoe]

A friend make key with tango
The car don’t accept any more
I think the problem is Ecu lock , steering wheel not linked with smart key and immo, I try link with bridge on obd conector but don’t succes I never try with software tango for synchro Ecus


Sent from my iPhone using Tapatalk

[Bdmjoe]

I can’t see the eprom in Ecu engine



Sent from my iPhone using Tapatalk

[Bdmjoe]

I attached fotos yesterday in this forum



Sent from my iPhone using Tapatalk