How to virgin the W203 EIS (EZS)

[nguyennhatquang]

i have a used EIS (EZS), now i want to virgin this, how to do that, please help me, it is 4j74y MC68HC 908AZ60, i can not read the eprom of it, because it died.
i must to replace the chip inside it. but i don't have dump.
Please help me. Thank.

[mercis]

and,virgin eis need green key

[bali motor]

and,virgin eis need green key

whether the green key can be re-programmed
and is there any software for it

regard

[nguyennhatquang]

if we don't have green key, how can we do that ?
Thanks.

[mercis]

have you eis without key?you can key make with
ak 400,

[bali motor]

have you eis without key?you can key make with
ak 400,

I Have good key, and new EIS but i not have new green key.
old EIS damaged. i can not read mcu from eis.
i have used green key, i bay from ebay.

you any solution?

regard

[harryauto]

it is so easy to solution ,and i have thousand experience to repair EIS ,( no need a green key ) ,
Frist , you should tell me W203 which model , c200 & C240 or C32 , EIS is damaged and CPU must be read data , What a u programmer to read the 4J74Y CPU ? EIS only read one cpu and it OK , To read 4J74Y cpu the best of ETL Programmer , Try it , read eprom & Flash and change new ic will be ok , sometime have another hardware problem , any question E-mail for me and i can help u ...E-mail : harry@harryauto.com (Harry) Hong Kong

[bali motor]

it is so easy to solution ,and i have thousand experience to repair EIS ,( no need a green key ) ,
Frist , you should tell me W203 which model , c200 & C240 or C32 , EIS is damaged and CPU must be read data , What a u programmer to read the 4J74Y CPU ? EIS only read one cpu and it OK , To read 4J74Y cpu the best of ETL Programmer , Try it , read eprom & Flash and change new ic will be ok , sometime have another hardware problem , any question E-mail for me and i can help u ...E-mail : harry@harryauto.com (Harry) Hong Kong

hi,
my part number EIS 210 545 02 08, my car c240 year 2000.
MCU1 (0D69J) MCU2 (0D69J). all mcu can not read.
I have AK400 programmer.
can you help me?

regard

[mercis]

on w203 dont work,eis with the partnumber 210

[nguyennhatquang]

My EIS part number is
203 545 01 08
i have emailed u, Harry.
Thank u so much.

[harryauto]

Hello bali motor :
Your car is W202 or W203 ?
However , EIS 210 545 02 08 two CPU must be dump , but engine ECU no need to do it , I think that your problem is use AK400 , AK400 and Ak500 both is trash..... , use ETL or X-prog programmer to do that must be ok ,(not china make) , CPU only can read Eprom data , flash is not can be read ....(remember)
Any problem , E-mail for me....(Harry Auto Elect. Research Laboratory) Harry Cheng from HONG KONG

[julianii]

can anybody tell us how to change vin number of mercedes?
is that possible ?after k-line change.
thanks.

[harryauto]

Hello Julianii : your question is how to change M.Benz VIN no. , your mail say u have a AK500 programmer , so the first , you open EIS file , you can looking for your car VIN no. from ASCII , Change a VIN no.and write CPU , renew ESL and Engine ECU , and last , use MB star to coding ESL and engine ECU , it will be ok ..(ESL active in EZS system)

[ant21000]

Harry, how I renew the Engine ECU and the ESL ? Thanks !!

[harryauto]

Harry, how I renew the Engine ECU and the ESL ? Thanks !!

Hello sir :
renew Engine ECU & ESL , differ ECU & differ parts no. renew is not same , your should tell me your ECU parts no. ,which model ,and send the MCU data for me , and i will send u back a renew data , ESL renew : i will though K-line to renew it , same AK400 or ESL key locked to do it .
My E-mail : harry@harryauto.com (Harry)
Skype : harryauto

:santaclaus:

[firestator]

hi,
my part number EIS 210 545 02 08, my car c240 year 2000.
MCU1 (0D69J) MCU2 (0D69J). all mcu can not read.
I have AK400 programmer.
can you help me?

regard
please send us a dump (MCU1 (0D69J) MCU2 (0D69J)) on the EIS 210 545 02 08, my car year 2000

[key-maker]

THIS IS THE SAME EIS
PLEASE CHECK THIS FILE AND POST YOUR REPLY