PDA

View Full Version : bosch edc17c10 psa peugeot 208 1.4 immo off



gregforce
9th October, 2018, 10:00 PM
Hello, i need immo off please for this peugeot 208
I have read with galetto if is suitable...
Thanks in advance,

garagecfa
10th October, 2018, 08:06 AM
try and repport
THANKS+REP :)

brend
10th October, 2018, 10:29 AM
Hello, i need immo off please for this peugeot 208
I have read with galetto if is suitable...
Thanks in advance,

Your file not separated.
Work with this impossible.

gregforce
11th October, 2018, 09:35 AM
Thanks for your help
Sorry for this i did not know

Here are the files seperated

gregforce
11th October, 2018, 11:51 AM
try and repport
THANKS+REP :)
Car starts, when you stop it and car's network sleeps after 3 min, then not starter works also the ecu is dead.
I reprogrammed ca rstarted again, but after a few min dead again. I think needs immo off and the eeprom ans at the end checksum.

gege974
11th October, 2018, 01:20 PM
Hello




here is your off on eprom.
and put back your original flash.
mp in box
https://www108.zippyshare.com/v/ZFxUsdHh/file.html

gregforce
11th October, 2018, 02:16 PM
I write first my ori flash and then the eeprom you sent?

gege974
11th October, 2018, 02:20 PM
yes we have to do like that

esse
11th October, 2018, 09:56 PM
Hi,
if not work try this
tested many time

gege974
12th October, 2018, 02:57 PM
Hi friend
so the car starts?

gregforce
14th October, 2018, 08:57 PM
Sorry for the delay but that ecu dead ...
I can uplaod from another new if you can help.
Thanks in advance

gregforce
14th October, 2018, 09:05 PM
esse (http://www.digital-kaos.co.uk/forums/member.php/120877-esse)This file i can put at any ecu edc17c10 psa?
Because with ecu i had i could not try because it was dead....
Now i have a new used which i have put files above.

Thanks inadvance

gege974
14th October, 2018, 09:33 PM
Hello
here.
same word pass, do not forget to give news?

esse
15th October, 2018, 08:58 AM
Hi,
-----------new off--------
same pass

gregforce
22nd October, 2018, 09:39 PM
Hello and sorry for the delay...
I have no news car left from my place. If i find a same one i will try i promise.
Thanks for your help, maybe i will post from another same ecu again for test