2014 Honda Accord Airbag light Will not go out

[alex_r_2001]

Hello my brothers and sister I am currently stumped.. I have this 2014 Honda Accord Ex that has no fault codes stores or current in the airbag module. I also re-initialized the Sws/opds with no problems but still light will not go out.. I did a full scan on the car and I do not have any communication codes.. I do not know what else to do at this point.... Here is a little background on the vehicle, it was in a accident but airbags did not deploys only driver seatbelt was damaged.. I honestly do not know if the airbag module has been reset either meaning I do not know if crash data was removed, if it was is it possible it was incorrectly modified.... is there any way I can check the eeprom with my vvdi prog because the cheap carprog i bought has not worked before so I do not want to even try and end up corrupting my eeprom... please any help would be greatly appreciated... I have looked up for any TSB's related to this vehicle with no luck... thanks cheers

[dune85872005]

locate your airbag ecu.....open the ecu and read eeprom whith vvdi prog ,vvdi its working good......post your ecu number and eeprom content here and someoane will helpyou.....

[andrushka]

2014 accord comes with SPC MCU no eeprom there.... I don't think VVDI will read that.

[Many100]

friend all tha time re-initialized the Sws/opds two times
because the other way dont go off 14 and 15 accord
you already made a module before with the same file that you are using right now