Dump GID Astra H Ident BM

[ArbeGTC]

Hi,

i need an eeprom dump from a GID display from an Astra H. But should be from a GID type BM Part number: 13275953 (Siemens VDO)

From this display:

564250

564251

Someone can share a eeprmom dump? (chip 93c66) KP and SE GIDs not valid.

Thanks so much!

-----------------------------------------------------------------------------
Upgrade OK to 3 Lines:
KP in HW 5.20 Tested by me
SE in HW 5.20 Tested by bank

Vins for upgrade in SPS:
W0L0AHL35A2092407 > Valid
W0L0AHL6795006621

In the eeprom, edit:

replace 00C80F7B (for KP GIDS) with 00CA9331 (two times)
and KPKP to BMBM

replace 00C916CA (for SE GIDS) with 00CA9331 (two times)
and SESE to BMBM

Thanks exe123 for this info!
(http://www.digital-kaos.co.uk/forums/member.php/501541-bank)

[bank]

What's wrong with your dump?

[ArbeGTC]

hi!

I need the eeprom from a BM type for testing with GlobalTIS the SPS (Service Programming System)

I cant find a BM GID (cheap) to buy them and test.

[exe123]

You just need to modify partnumber and ident inside your dump and use SPS with the correct VIN to update.

replace 00C80F7B with 00CA9331 (two times)
and KPKP to BMBM

[bank]

hi!

I need the eeprom from a BM type for testing with GlobalTIS the SPS (Service Programming System)

I cant find a BM GID (cheap) to buy them and test.
I think you'll receive something like that:
564259

[exe123]

Tested and works fine on KP. SPS just checks partnumber and ident from eeprom of VDO GID

[bank]

I was trying to update KP, SE, AT, BG without success :(
I think VIN also is needed.
I'll try again...

[exe123]

Of course you will need correct VIN. Search on ebay for partnumber of BM display. Most german parts vendors will write also VIN of the scraped car.

[ArbeGTC]

You just need to modify partnumber and ident inside your dump and use SPS with the correct VIN to update.

replace 00C80F7B with 00CA9331 (two times)
and KPKP to BMBM



Thanks!!!!!!! :applause::applause::applause::applause::applause: :applause:

[ArbeGTC]

Of course you will need correct VIN. Search on ebay for partnumber of BM display. Most german parts vendors will write also VIN of the scraped car.

VINs for BM:
W0L0AHL35A2092407 Found in: https://www.varaosahaku.fi/fi-en/Sea.../OEM-13275953/


(https://www.varaosahaku.fi/fi-en/Search/Car-parts/Opel/OPEL-ASTRA-H/2004_2012/Electric-&-Transmitter-&-Databox-&-Sensor/Bordcomputer/Interior-front/ID-31205798/OEM-13275953/)W0L0AHL6795006621: Found in: https://www.ebay.es/itm/Bordcomputer-Display-Bildschirm-Entheiratet-13275953-OPEL-ASTRA-H-TWINTOP-1-9/283078533272?fits=Make%3AOpel&hash=item41e8cba098:g:JDoAAOSw39VbXtIO:rk:2:pf:0

[ArbeGTC]

Well, after mod the eeprom of the GID. now SPS shows the GD83 software to update. But in tech2 remote, java crashes....

http://i63.tinypic.com/20702gn.jpg

i will try in pass-tru mode (J2534 Tech2)

Vin used in eeprom and SPS: W0L0AHL35A2092407

[bank]

Well, after mod the eeprom of the GID. now SPS shows the GD83 software to update. But in tech2 remote, java crashes....

http://i63.tinypic.com/20702gn.jpg

i will try in pass-tru mode (J2534 Tech2)

Vin used in eeprom and SPS: W0L0AHL35A2092407

Here is result of test:
https://uploads.tapatalk-cdn.com/20181015/e94a60de9e7a2c3fb1443b804fae2132.jpg

[ArbeGTC]

GID upgraded successfully. 2 Lines (GD59) to 3 Lines (GD83)

http://i68.tinypic.com/v45hrd.jpg
http://i63.tinypic.com/1zqu0ed.jpg

GID KP in HW 5.20. Edited the P/N like as a BM GID display
http://i64.tinypic.com/fnahec.jpg
http://i67.tinypic.com/2qansde.jpg

Thanks to all!!!!!!

[bank]

GID upgraded successfully

What is a version of GlobalTis you are using?

[ArbeGTC]

What is a version of GlobalTis you are using?

The latest full version. V32

[bank]

https://uploads.tapatalk-cdn.com/20181015/ca615e737064139d16d8ecbc53d3dec6.jpg
Have the same GlobalTis version but without success. May be because my KP has older version of SW
https://uploads.tapatalk-cdn.com/20181015/1d51f86456f72e53ec19d260c07ae90a.jpg

[ArbeGTC]

Maybe the Hardware 3.0 beens too old. try upgrade with the original eeprom to GD59 (shoud be sucessfuly), then change to BM and test again. I have upgrade a GID in Hardware 3.0 and 3.20 to GD59 and OK. i want try upgrade 3.0 and 3.20 to GD83. I have some GIDs 3.0 and 3.20 for try.

564401564402

[bank]

Today is not “my day”
Doesn’t work work for me :(
https://uploads.tapatalk-cdn.com/20181015/12e0753de2af4effe8b6675cbb3d883d.jpg
https://uploads.tapatalk-cdn.com/20181015/ca44fac7b041a8c655b050a147b1c9e6.jpg

[ArbeGTC]

Today is not “my day”
Doesn’t work work for me :(


i will try upgrade the GID HW version 3.0 and 3.2 to GD83 in some days and post the results.

[bank]

I'll try today with hw5 SE

[bank]

Here is report for SE GID
https://uploads.tapatalk-cdn.com/20181016/d59a02a7d14305277ff3fc410c766df1.jpg
https://uploads.tapatalk-cdn.com/20181016/7caf6325f5e4eb861c4e2f3e38f3f8cd.jpg
SE successfully updated to SW83.
It has 3 line in cdc40 mode, but still 2 line in cd30 mode
https://uploads.tapatalk-cdn.com/20181016/f55b7c7d1f70b16e1d0569a787c959e2.jpg
https://uploads.tapatalk-cdn.com/20181016/2869ac90f93a6b246d4bb44d0ac0d64d.jpg
Also it has a bug in 0-consumption
Check with 005 and 009 code indexes

[ArbeGTC]

Here is report for SE GID


SE successfully updated to SW83.
It has 3 line in cdc40 mode, but still 2 line in cd30 mode


Also it has a bug in 0-consumption
Check with 005 and 009 code indexes

nice.

in 3 line mode 0-consumption works ok?

[bank]

try upgrade with the original eeprom to GD59 (shoud be sucessfuly)
Without success
https://uploads.tapatalk-cdn.com/20181016/389d2bf5abb890ce258a54747379ce11.jpg

[bank]

In 3 line mode 0-consumption works ok?

The same
https://uploads.tapatalk-cdn.com/20181016/4537bac7fb9fbeca18d8d560b00b6b2a.jpg

[bank]

try upgrade with the original eeprom to GD59 (shoud be sucessfuly), then change to BM and test again.
Upgrade to GD59 doesn't work for me but problem with old hardware is solved.
Both KP and SE are upgraded.
0 Consumption shows 30+L/100 for both displays, but may be it's need to drive some distance to calculate correct consumption

[budata]

Hello, 2 or 3 line information in eeprom is stored ? :)

[ArbeGTC]

Upgrade to GD59 doesn't work for me but problem with old hardware is solved.
Both KP and SE are upgraded.
0 Consumption shows 30+L/100 for both displays, but may be it's need to drive some distance to calculate correct consumption

upgraded the HW 3.0 to gd83 successfully?
then, the 0 Consumption, works fine after drive some ditance? or have not you tried it?


Hello, 2 or 3 line information in eeprom is stored ?

The eeprom only store Carpass or delivery state, code index, vin number, product number, alpha code, the variant configuration and some more config.
for the screen shows two or three lines, depends of the firmware version. (Not stored in the eeprom 93c66 is in another chip of the gid)

[bank]

upgraded the HW 3.0 to gd83 successfully?
then, the 0 Consumption, works fine after drive some ditance? or have not you tried it?

Yes, thats right.

[bank]

Hello, 2 or 3 line information in eeprom is stored ? :)
It stores in flash, not in eeprom

[budata]

Only GlobalTis can do that ?

[bank]

Only GlobalTis can do that ?
It's easier to do with GlobalTis via ODB than by desoldering flash

[exe123]

You can also do manually by updating external flash and internal flash of ST10 MCU. But I doubt somebody will share the files.

[budata]

Thank you for the information....:)You may find some to share a file.:)

[bank]

It's not a problem to share files.
There is a some difficulty with the flash desoldering (http://www.digital-kaos.co.uk/forums/showthread.php/630920-Opel-Vectra-C-3-line-CID-dump?p=3164454&viewfull=1#post3164454) and reading the dump

[exe123]

external flash is no problem. ST10 you will fail!

[cone96]

///////////////