Dump and pin For BCM Opel Meriva 70F3380

[BusCan]

Hello
Following a bad handling of a programmer I mistakenly erased a Pros 70F3380
BCM 13356921
If a person who has a dump with pin code it will be super cool
I enclose a photo of the module with pinout
Thank you

[BusCan]

Hi
Possible to help me code securité for the dump

Thanks

[Bllinda]

try. .... ....

[BusCan]

Thanks Bllinda (http://www.digital-kaos.co.uk/forums/member.php/162273-Bllinda)
I am looking for a Flash and Flash dump for this module BCM 13356921 uPD70F3378
If any of you have this, it's so cool
Thank you

[BusCan]

Hi
Possible to give me a pin code from the VIN?
I can not read the MCU 70F3380 it and protect
Here is the wine W0LSD9ECXB4260985
Thank you for your help I am stuck with this car

[Bllinda]

read the device data that has this vin code


Hi
Possible to give me a pin code from the VIN?
I can not read the MCU 70F3380 it and protect
Here is the wine W0LSD9ECXB4260985
Thank you for your help I am stuck with this car

[BusCan]

read the device data that has this vin code

Hi Bllinda
Not possible this MCU and protected
-----------------------
Readings : disabled
Programming : enabled
Block Erasing : disabled
Boot ReWr : enabled
Chip Erase : enabled

Thanks

[BusCan]

try. .... ....

Hi Bllinda
Your code not good code Upside down!! after 3 days of work and purchase of Smok
Thank you

[BusCan]

Hi
Her read NEC 70F3380 For Meriva B 2011
BCM 13356921
Reading via IoTerminal

Code 2503 for reset
if it can help someone other than me
Good luck

[BusCan]

Hello everyone
A person knows the key programming procedure for Opel Meriva B year 2011
I have a professional OP-Com a days
I enter into dialogue with the BCM Reset my impossible to recognize the keys
If someone between you know the procedure it will be super cool
Thank you

[BusCan]

(https://www.digital-kaos.co.uk/forums/member.php/162273-Bllinda)Hello everyone,
After a hard research on the CBM system I finally modify a dump (Dflash) on a BCM
I spent them in a Total Virgin operational with GM_MDI
If someone is stuck with this source he asks me
It's free just a thank you me enough
And thanks to our friend Bllinda

[COTECH 81]

Bonjour je serais intéressé par le Dflash le problème je ne trouve pas que l'eeprom est le MCU UDP70F3380 que ce soit avec le prog vvdi ou upa usb j'ai un message d'erreur l'eeprom est protégé avez-vous une idée merci

[COTECH 81]

Bonjour je serais intéressé par le Dflash le problème je ne trouve pas que l'eeprom est le MCU UDP70F3380 que ce soit avec le prog vvdi ou upa usb j'ai un message d'erreur l'eeprom est protégé avez-vous une idée merci

[COTECH 81]

hello l would be interested in the Dflash the problem l do not find the eeprom is the UDP70F3380 whether with the vvdi or upa usb prog l have an error message the eeprom is protected have you any idéa thank you

[publiperro]

Hello everyone,
After a hard research on the CBM system I finally modify a dump (Dflash) on a BCM
I spent them in a Total Virgin operational with GM_MDI
If someone is stuck with this source he asks me
It's free just a thank you me enough
And thanks to our friend Bllinda

the car is in transport mode and there is no way to get it out that way.
bcm used micro 70f3633 / 70f3634I bought used bcm and I try to program with opel tips after having virginized it with the io / terminal option, but it fails in the programming, I want to think that it is because the number of the vin is not the same, there is a way to change it.
here is the dumps of the original bcm of the car with transport mode and the used one that is fine.

[BusCan]

the car is in transport mode and there is no way to get it out that way.
bcm used micro 70f3633 / 70f3634I bought used bcm and I try to program with opel tips after having virginized it with the io / terminal option, but it fails in the programming, I want to think that it is because the number of the vin is not the same, there is a way to change it.
here is the dumps of the original bcm of the car with transport mode and the used one that is fine.

Hi The two Dflash readings without deferens ?? Did you read both with ioterminal?
Does your original file start the vehicle?
What and the number of your BCM

[publiperro]

Hi The two Dflash readings without deferens ?? Did you read both with ioterminal?
Does your original file start the vehicle?
What and the number of your BCM

If the readings are different, one is the original one that if the vehicle starts and the other is a used bcm, but the problem is that the original is in transport mode and doors, radio, etc. do not work and I want to adapt the used one , since if I pass the information from the original to the used one, the car starts but continues in transport mode.
everything is read with io terminal.

[BusCan]

OK Do you have access to SPS online?

[publiperro]

if i have access

[BusCan]

if i have access
Here Dflash virgin
Teste and repor pls

[publiperro]

Here Dflash virgin
Teste and repor pls

Mars or Wednesday I will make the car, when I programmed it I will tell you, thank you very much, if it works you have saved my life with this car, which is driving me crazy, thank you very much again, I tell you when I programmed.

thanks buscan.

[BusCan]

Mars or Wednesday I will make the car, when I programmed it I will tell you, thank you very much, if it works you have saved my life with this car, which is driving me crazy, thank you very much again, I tell you when I programmed.

thanks buscan.

Hi

Thank you normally you have no reason for it not to work. For your information I'm not saving anyone :) it's god who saves :) it's creature
Keep us informed

[publiperro]

Hi

Thank you normally you have no reason for it not to work. For your information I'm not saving anyone :) it's god who saves :) it's creature
Keep us informed

Everything has gone to perfection thanks to your help and if you have saved me by virginizing my bcm, thank you very much.


By the way, did you virginizar with sps in the option to restore a new unit or do you have a program to make the unit virgin, again thank you very much.

[BusCan]

Everything has gone to perfection thanks to your help and if you have saved me by virginizing my bcm, thank you very much.


By the way, did you virginizar with sps in the option to restore a new unit or do you have a program to make the unit virgin, again thank you very much.

Thank you for the feedback it is a blank file following a relentless research language I'm happy for you it's your Christmas presents ::encouragement:

[djicek]

Here Dflash virgin
Teste and repor pls

password please

[BusCan]

password please

Hi
Poste original dump
Thanks

[jacostanzo]

Hello friends, I need help for full virgin file, after battery flat car goes crazy, I made clone with io terminal to a new bcm no solve, problem in original dump.
I try to adapt the used one no succes, in attach dump from used bcm to put in virgen mode. Thanks

[BusCan]

Hello friends, I need help for full virgin file, after battery flat car goes crazy, I made clone with io terminal to a new bcm no solve, problem in original dump.
I try to adapt the used one no succes, in attach dump from used bcm to put in virgen mode. Thanks

Hi Did you solve your problem with the meriva?

[zoko]

I have; Opel Meriva B (S10) 1.4i 74kW (100ks) A14XER E5 2010g
BCM: Delphi 13350882 13349932 (with LOCKED MCU: NEC D70F3380-M2 QFP144) and not possibe to read any original memory.
When I use "DFlash_vierge.rar (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=770212&d=1608315647)" file in combination with any of the 3 attached files, SPS encoding does not pass.

[sswiftRuslan]

Hi
please make it virgin
thanks

[BusCan]

Hi
please make it virgin
thanks
Hi
Have you solved your problem?
See you soon

[kobelco]

Hi, I need help with this bcm.
The original bcm has the d_flash corrupted.
I have another bcm, same code, this one was reset with op-com but I can't code the keys. can anyone help me to do a virgin dump.
Thank you

[BusCan]

Hi, I need help with this bcm.
The original bcm has the d_flash corrupted.
I have another bcm, same code, this one was reset with op-com but I can't code the keys. can anyone help me to do a virgin dump.
Thank you

Hi
OK Do you have access to SPS online?

[kobelco]

No

Inviato dal mio Pixel 6a utilizzando Tapatalk

[BusCan]

No

Inviato dal mio Pixel 6a utilizzando Tapatalk

it's going to be complicated my friend

[kobelco]

ok mate, i can see about taking sps, but i still need a virgin smoke?

Inviato dal mio Pixel 6a utilizzando Tapatalk

[BusCan]

Hi, I need help with this bcm.
The original bcm has the d_flash corrupted.
I have another bcm, same code, this one was reset with op-com but I can't code the keys. can anyone help me to do a virgin dump.
Thank you

If you found the same BCM number you just write the eeprom it should work.
Be careful not to write the flash risk of blocking the BCM since the NEC 70F3380 and protected

[kobelco]

If you found the same BCM number you just write the eeprom it should work.
Be careful not to write the flash risk of blocking the BCM since the NEC 70F3380 and protectedThe original bcm has the EEPROM corrupted after a software update and the car doesn't start anymore

Inviato dal mio Pixel 6a utilizzando Tapatalk

[kobelco]

Hi, I need help with this bcm.
The original bcm has the d_flash corrupted.
I have another bcm, same code, this one was reset with op-com but I can't code the keys. can anyone help me to do a virgin dump.
Thank youthis is a bcm file, with the same number as the original, reset with Op com.

[BusCan]

this is a bcm file, with the same number as the original, reset with Op com.



Normally you don't need to do key learning if you have the original dumps

[greg38]

Hello Guys,

I need virgin dflash for BCM 13349932. Can anyone help me with virgin dump?

Thanks!

[McDowell]

Hello Buscan,

Can you help me with this one?, car doesn´t start i think corrupted data because of flta battery as well.

Thanks

[Saab A Dalys LT]

What is the part number

[McDowell]

What is the part number

You can see it on the .rar attached, please see picture

973311

[taikun]

can you make them a virgin?


damage was caused by a weak battery


transport mode on / charging indicator blinking / central locking not working


I have access to SPS

[libb]

i'm in same boat with 2014 Meriva B in transport mode. I try to reprogramm 2nd hand BCM, but SPS fail to do... something interupt writiing. Did someone can look in io terminal reads from original and donor? I'm ready to donate to person if can help me...no information in TIS for Transport mode, Opel say need brand new/service part BCM.

[rob h]

You will need to post the partnumber.

Do you have ioteminal, or a programmer.

New. Not needed.
Io can reset to virgin. But also used bcm can be programmed using sps.

[moow]

Anyone have solution for this problem yet? willing to donate for solution

[BusCan]

Anyone have solution for this problem yet? willing to donate for solution
Hi
You don't need contribution data
What problem are you facing?
THANKS

[Neorej]

Hi,

Can someone help me with this BCM?
This car is killing me.
Data is corrupted..
I need a virgin file or file from used BCM without problem.
IO only virgin PIN and SPS fails with that file
GM39013501
Delphi 70F3633

BR