PDA

View Full Version : PSA Peugeot 308 1.6 90bhp kess/mpps?



IamAlexMeijer
17th October, 2018, 07:11 AM
Hi,

I was wondering about remapping this car:


MPPS INFO: (read write only in the car) leave key off for at least 3 min after prog)

KESS INFO: On some types of ECU it need to be needed to recode the encoding of the injectors through a diagnosis tester.

We recommend not turning on the engine after programming and wait till dash completely off.


Any more info?
Can we disable this in the MAP?

ivanmihov
17th October, 2018, 07:44 AM
for this use it's better not to risk,you need to open it and read/write in bdm with ktag

IamAlexMeijer
17th October, 2018, 08:01 AM
for this use it's better not to risk,you need to open it and read/write in bdm with ktag

Thx.
Is there a list (KESS/MPPS) for cars that you should not do using OBD?

dudus8
18th October, 2018, 06:00 AM
Kess read and write this without problem by Obd.
After write you must wait 3 min with ignition off and 2 min with ignition on then car start.

Wysłane z mojego SM-G965F przy użyciu Tapatalka

moky
18th October, 2018, 06:48 AM
kess and mpps work fine on edc16C34 if you respect procedure,tested.

Myjector
18th October, 2018, 07:05 AM
Kess works fine, and write very fast to, faster than X17
But if you feel not safe, take a bdm full read first.
Cut off ignition for about 3 minutes.

IamAlexMeijer
19th October, 2018, 10:50 AM
its EDC17C10 / 60... :(


Kess says its normal OBD

Myjector
19th October, 2018, 12:57 PM
Only Autotuner does them OBD.
But if you have an ktag clone you can do EDC17C10 in boot, easy connection

IamAlexMeijer
19th October, 2018, 03:28 PM
Only Autotuner does them OBD.
But if you have an ktag clone you can do EDC17C10 in boot, easy connection
i don't but i might buy one then because it's quite annoying to tell people you can't do something.
Just because you don't have the stuff for it.

How long do you guys tell people it would take?