PDA

View Full Version : Mercedes Sprinter W906 2.2 CDI Delphi CRD 2 dpf off mil blinking



ivanmihov
17th October, 2018, 07:41 AM
Hi i made dpf off for this ecu delphi CRD 2 with swiftec,dpf is off but mil lamp is blinking.before write mod,i did reset dpf soot counter with autocom,don't have star diagnose.Everything works OK dpf is off but mil is blinking,no faults in ecu tried to disconnect dpf sensor but still the same.Is there any procedure maybe with star before writing mod

Inquizit0r
17th October, 2018, 08:21 AM
Do it via DAS. Not need to reflash this ECU.

ivanmihov
17th October, 2018, 08:47 AM
i know but don't have DAS

Inquizit0r
17th October, 2018, 08:50 AM
So, Swiftec and ASC remover did this ECU with MIL blinking. Only manual solution.

AVDigitale
17th October, 2018, 05:05 PM
delphi ecu always with manual solution needed swiftec and other not working good
but you can try with benz star diagnostic to reset again dpf and soot and to try

maajkii
17th October, 2018, 06:04 PM
solution is :
Update ecu software with SD
Some SW dont work even with manual solution!
P2bac fault!
When you delete this fault from DTC list, you get P0000
Probably star diagnose dont give any DTC but generalt protocol in autocom see P0000 or P2bac.

Upgrade SW with SD and than read file again.
Also always reset DPF with ori file.
Its common problem.