PDA

View Full Version : Renault edc16c3 IMMO off?


gremis
18th October, 2018, 05:58 PM
OK, I have dead original ecu from the renault scenic 2004 1.9dci. I've got a second hand one and I wish to make it work.
I've read full BDM of the new/used ecu.
Can anyone please make these files work? Thanks!
marekmcc
18th October, 2018, 06:34 PM
You can remove 95160 eeprom to start car, but it was in emergency mode (max 2000rpm). You have two options - buy Renault CAN emulator or program ecu with virgin file and write vin and injector codes example with KTS
baltazar3
18th October, 2018, 07:27 PM
OK, I have dead original ecu from the renault scenic 2004 1.9dci. I've got a second hand one and I wish to make it work.
I've read full BDM of the new/used ecu.
Can anyone please make these files work? Thanks!
Are You try to unsolder EEPROM and read with external progremmer ?
gremis
18th October, 2018, 08:00 PM
That's the problem that old eeprom is damaged and I can't use it....

I probably need virgin file please. Do anyone have it?

Also, can I write VIN and injectors with other equipment? I don't have KTS... I have Galletto V54, AutoCOM and CAN CLIP.

Thanks a lot
kiszka
18th October, 2018, 08:45 PM
..........
gremis
18th October, 2018, 09:26 PM
But can you change VIN number with CLIP? I thought it was impossible..
kiszka
18th October, 2018, 09:46 PM
..........
gremis
18th October, 2018, 10:34 PM
VF1JMRG0631573175
kiszka
18th October, 2018, 10:56 PM
..........
gremis
19th October, 2018, 07:13 AM
Thanks kiszka. Unfortunately it makes eeprom fault... Can't start the engine, can't delete dtc, can't program injectors...
kiszka
19th October, 2018, 09:11 AM
..........
gremis
20th October, 2018, 11:35 AM
kiszka, your second eeprom does indeed change VIN number in it and I can see it with diagnostic cable!
I also see DTC's like MAF and so on... But that is not matter. I can not start the car because IMMO is active. I also can't clear DTC's and can't program injectors. Is it because IMMO is active?

Also, is there any chance to clear immo?

Thanks a lot
kiszka
20th October, 2018, 12:22 PM
please delete
carsandkeys
3rd February, 2021, 11:08 AM
please delete
You can solve the problem?. Same problem here. Cars dont start, like immobilizer ecu, not pulse in inyector but immolight is off. I have another ecu with same ref, i clone this and have the same failure. original ecu eeprom seems damaged/corrupted, not appaers vin when read with ktag. Here Full BDM read from both ecu. Inside screenshot with Software and hardware number.