Peugeot 407 / 2007 BSI dead

[fabianlm]

Hello ! I have a problem with a Peugeot 407 / 2007. I tried to read pincode with fvdi 2015, then BSI died. No lights, wipers. I think the flash was erased. I found a dump in C://Abrites documents, but I think it's corupted. What solution do I have ? I can resolve this BSI, or I can adapt another BSI ? Sorry for my bad english.565778565778

[Buzztek]

Same thing happens to me on with zed full.
Disconnect battery for 15 seconds, reconnect and everything back to normal

Sent from my SM-G965F using Tapatalk

[fabianlm]

Same thing happens to me on with zed full.
Disconnect battery for 15 seconds, reconnect and everything back to normal

Sent from my SM-G965F using Tapatalk

I allready disconected the battery, more than 15 seconds, but nothing happened.

[topclef]

FVDI will corrupt BSI JCI flash , don't use FVDI for BSI JCI .
attached original flash-dump 12C5 , write it and all will be ok

[fabianlm]

FVDI will corrupt BSI JCI flash , don't use FVDI for BSI JCI .
attached original flash-dump 12C5 , write it and all will be ok

Thanks a lot. Can I write this flash with fvdi ? And how ? Thanks a lot. I never met this problem, so I'm not sure what it supposed t do.

[topclef]

use ECU Flasher special function , choose BSI JCI , load flash and write .

[fabianlm]

use ECU Flasher special function , choose BSI JCI , load flash and write .

Thanks a lot. I will try this. I hope it will be ok.

[fabianlm]

FVDI will corrupt BSI JCI flash , don't use FVDI for BSI JCI .
attached original flash-dump 12C5 , write it and all will be ok
It works very well. Finally the dash born again, and the engine start. Thousands of thanks. Thanks a lot.
I have another question. The client changed the dashboard (or instrument cluster I think named) with two others, and now he has a different mileage than original.
There is a safety solution to change mileage to original ? Can I use special function "CAN calibration " of fvdi ? Thanks a lot.
I didn't want to risk, I want to ask first.