Toyota Avensis 2.0 D4D SW: 89660-54230

[Agiukas]

Hello respected DK members,

Today i came up to situation when I need to ask other help,

I have Toyota Avensis 2.0 D4D 85kW 2004. I need to do DPF OFF for it, but seems I can not read it, maybe someone have any solutions?

in KTAG I can't find such HW: MB175822-638 (using clone KTAG 7.020)
tryed to to read with X17, but also no success, got ID, but they have no ori file
SW: 89660-54230

maybe someone have ori file, or maybe know if posile to read it with KTAG and have conection info?

Thanx in advance.

[voltechcar]

to 99% cpu Fuijtsu and no jtag connection to cpu

[Agiukas]

it has same CPU 76F0040GD as all similar ecu's

[phl0at]

As far as I know, Toyotas D4D which are 85kw or 116hp cannot be read nor written, doesn't matter if it is JTAG or OBD. Only Toyota Flasher can do these or the other solution is to put emulator for egr or dpf.

[voltechcar]

photo motheboard please....

[Agiukas]

photo motheboard please....

Here you go, adding both sides.

[voltechcar]

Ktag and prt 926

[Agiukas]

Ktag and prt 926
sry if i didn't understand what u say, but seems my ktag clone 7.020 don't have such protocol :/

[voltechcar]

I have this protocol

[Agiukas]

I have this protocol

Maybe can post picture of KTAG connections? curious what my KTAG would say if I try to solder wires and try to read it on some other protocol :D or I better not risk with this type of ecu...? :/
In general all these type of ECU have same connection accept 1 gray wire.

[voltechcar]

I dont know what you must use, I have this ecu on K-tag and VF2 Flasher. Both read and write with fix crc.