help ecu renault master

[cristiano27rr]

Good afternoon friends!! I need help with a module of the renault master 2.5 year 2013 0281013364, this module is always recording malfunction of coding of injector nozzle, I wanted to change the file of soic only that this module to eeprom is a 95640 with file of 8kb and I so to getting the file to 95320 from 4kb

[brend]

.............lol
Only in your dream.!!!
Work with this cotail impossible...........
For repair ,dump must by from 100% same hw/sw/ ecu.

[kiszka]

..........

[brend]

I thiknk trable have another place not in ecu software.

[cristiano27rr]

already tried coding the nozzles with 8 different scanners all to no avail !! so I wanted to change the soic file, because I saw it here in the forum that solved this problem by doing this procedure! some typing error because I'm using a translator

[credoline]

I know the problem. It happend with bad data in eeprom. You can not use KESS to read eeprom in engine ecu. You must open ecu and read eeprom with KTAG or with BDM100 (CMD BDM flasher). After that make eeprom virgin, give ignition on, start the car, drive the car some short distance, stop the car, code injectors. Read file and upload it here. File is 4KB big and its good size.


already tried coding the nozzles with 8 different scanners all to no avail !! so I wanted to change the soic file, because I saw it here in the forum that solved this problem by doing this procedure! some typing error because I'm using a translator

[brend]

With renault clip possible this ecu totally reset.
So.......find clip .

[cristiano27rr]

this is the problem friend, the file here of eeprom is 8kb and not 4kb so I can not get this file! already tried to encode the clips with my clip and the clip of the dealers without success too

[credoline]

Yours file recoded by tested solution. Do not worry about 8kb file, write and test.

[cristiano27rr]

Good Morning! I'll test here! thanks for listening.

[cristiano27rr]

it did not work, she did not even communicate with the scanner with this file

[credoline]

Did car started ? If not started or not communicattion, you are made somewhere mistake and all that can be just because of your ignorance how to... and ...