PDA

View Full Version : Sprinter 515, strange problem after FAP and EGR off. Help needed.



morgano
24th October, 2018, 06:36 PM
Hello.

Suffering here quite rare problems with one MB Sprinter w906.

Tried manually dpf and egr off, but always van limits and spits errors about NOX over threshold.

This DTC appear even i delete them from the DTC table, P3151, P3152, P2664, P1954, P1955. Curious thing is i think this van does not have dedicated nox sensor, has it?

Can someone make proper manual solution with disconnected sensors please?

Here original. Tested swiftec v1 and v2 & not works.

kinketotua
25th October, 2018, 06:39 AM
Hi friend. try to write these file

have a nice day

kinketotua
25th October, 2018, 06:41 AM
Please clear you inbox I cant send you pm

morgano
25th October, 2018, 08:12 AM
Please clear you inbox I cant send you pm

Thanks, inbox cleared ;)

AVDigitale
25th October, 2018, 09:45 AM
Swiftec not working good needed manual solution in this ecus

voltechcar
25th October, 2018, 10:10 AM
this is not swiftec and on 100% this solution work, tested many times.

morgano
25th October, 2018, 08:01 PM
this is not swiftec and on 100% this solution work, tested many times.

?? :) which one? :)

voltechcar
25th October, 2018, 09:38 PM
first file ....

morgano
25th October, 2018, 10:57 PM
first file ....

First file is original my friend. ;)

voltechcar
26th October, 2018, 08:45 AM
first file modify, user kinketotua edit file and this must works.

ohkarol
26th October, 2018, 09:04 AM
swiftec works perfect in this ecu, you need just to think a liitle while using this solution...

morgano
26th October, 2018, 11:47 AM
swiftec works perfect in this ecu, you need just to think a liitle while using this solution...

Enlighten us please.

ohkarol
26th October, 2018, 12:07 PM
Enlighten us please.
obd read is only partial so..

morgano
26th October, 2018, 12:07 PM
first file modify, user kinketotua edit file and this must works.

Maybe i am blind or dumb this last week :) but the shitty ecm titanium detects it as original. What changes you see in first post file? Do you have a good ori dump you can upload? ;)

morgano
26th October, 2018, 12:09 PM
obd read is only partial so..

You suggesting is mandatory bdm read to do proper egr and dpf off with disconnected sensors?

morgano
27th October, 2018, 12:25 AM
Hi friend. try to write these file

have a nice day

Hi.

Van working fine today with your file, we will see in the comming days if not enters limp mode again, thanks a lot.

EVT
8th June, 2022, 05:27 PM
What was the solution for error code 3152? As it seems that always pops up even though deleted