View Full Version : CD30 mp3 help
kire235
25th October, 2018, 08:26 PM
Hello,
I want to replace factory radio in Astra H 2007 with CD30 mp3 radio GRUNDING and normaly gave me RADIO SAFE error and beeps, after searching i found virgin rom on this forum flashed the radio and problem with safe radio and beeps are gone but now display says DISPLAY SAFE - it is a TID small display. Can someone help me to pair radio and display, also attached original bin files .
Thanks in advance!!
RADIO: https://www120.zippyshare.com/v/Ol7SGJL3/file.html?fbclid=IwAR2lD7hZ8poXhAePQG8r-hY1UXJx_0boHo_NUnB5mYQ2N4u-QImjW-wZB0g
TID DISPLAY: https://www120.zippyshare.com/v/dHg1yAs4/file.html?fbclid=IwAR2SQlZ5TRm8FQVv2V7EEwk2WusjE0N AmIrcPDwpzXaS7G9eHj9eUQJSiUQ
shooting
25th October, 2018, 08:44 PM
Hello,
I want to replace factory radio in Astra H 2007 with CD30 mp3 radio GRUNDING and normaly gave me RADIO SAFE error and beeps, after searching i found virgin rom on this forum flashed the radio and problem with safe radio and beeps are gone but now display says DISPLAY SAFE - it is a TID small display. Can someone help me to pair radio and display, also attached original bin files .
Thanks in advance!!
RADIO: https://www120.zippyshare.com/v/Ol7SGJL3/file.html?fbclid=IwAR2lD7hZ8poXhAePQG8r-hY1UXJx_0boHo_NUnB5mYQ2N4u-QImjW-wZB0g
TID DISPLAY: https://www120.zippyshare.com/v/dHg1yAs4/file.html?fbclid=IwAR2SQlZ5TRm8FQVv2V7EEwk2WusjE0N AmIrcPDwpzXaS7G9eHj9eUQJSiUQ
Where is your original radio dump? also your links are Virused!
also your display needs to be read as 8bit not 16bit
wbr
kire235
25th October, 2018, 08:55 PM
Sorry i didn't know about ziphyshare is virused, probably a spam, uploaded on mega both files.
https://mega.nz/#!m9RQmIZR!Qf-t1Jem-3OuukCdgArn18LmeCWDVmbCa-P9v_pLST0
kire235
25th October, 2018, 08:59 PM
This is the original dump file from the radio, and i will read the diplay with 8 bit and will upload again.
bank
26th October, 2018, 07:49 AM
Code from radio dump is 1234
If dumps is from original radio, you can use it to pair new radio with display
shooting
26th October, 2018, 08:19 AM
Code from radio dump is 1234
If dumps is from original radio, you can use it to pair new radio with display
Just read Post#1 … he needs display pin!! and an unreg!!
wbr
bank
26th October, 2018, 08:42 AM
1. "want to replace factory radio in Astra H 2007 with CD30 mp3 radio GRUNDING"
2. "normaly gave me RADIO SAFE error and beeps"
3. "This is the original dump file from the radio" - post 4
So, code from original radio is the same as in display and new radio is divorced (cause it beeps)
In this case don't need to unreg display, just pair with new radio using code from display
shooting
26th October, 2018, 09:06 AM
1. "want to replace factory radio in Astra H 2007 with CD30 mp3 radio GRUNDING"
2. "normaly gave me RADIO SAFE error and beeps"
3. "This is the original dump file from the radio" - post 4
So, code from original radio is the same as in display and new radio is divorced (cause it beeps)
In this case don't need to unreg display, just pair with new radio using code from display
Why are you repeating what I'm telling YOU and bullet pointing it.. ffs.. are you 5??
Posting 1234 isn't going to help him.. read Post#1 again until you understand it...…
I am sick of getting PM's about your posts.....
wbr
bank
26th October, 2018, 09:19 AM
I don't understand what you mean sayin are you 5.
I was quoting info from topicstarter in 1st and 4th posts.
If I understand him correctly, he want to replace (change) radio from factory to another one.
In this case, if both posted dumps are from factory units, code in display should be the same as in radio.
In other case first post contains incorrect information.
That's what I mean.
Nothing personal.
kire235
26th October, 2018, 10:16 AM
This is the original BIN files from the radio and display - 8bit mode bin.
https://mega.nz/#F!nxRCGCzT!L98VStjHvwUbUiEeYu2NPg
bank
26th October, 2018, 10:20 AM
This is the original BIN files from the radio and display - 8bit mode bin.
https://mega.nz/#F!nxRCGCzT!L98VStjHvwUbUiEeYu2NPg
Incorrect dump of DIS
kire235
26th October, 2018, 10:56 AM
Sorry my mistake, this is it
https://mega.nz/#F!nxRCGCzT!L98VStjHvwUbUiEeYu2NPg
bank
26th October, 2018, 11:08 AM
Are you sure display is TID? I see VIN code in dump and dump is not full, may be eeprom is 93c66?
Looks like part of the dump from GID 93c66 was downloaded in TID 93c56
shooting
26th October, 2018, 11:08 AM
Sorry my mistake, this is it
https://mega.nz/#F!nxRCGCzT!L98VStjHvwUbUiEeYu2NPg
Dump is too short, wrong settings, try again
wbr
kire235
26th October, 2018, 11:53 AM
And now ?
https://mega.nz/#!Kgo0wIwA!5syTVR4YSZd_trJ3_7PKlWU2gwjZt2C73MI5Gwu PXUg
bank
26th October, 2018, 11:54 AM
And now ?
https://mega.nz/#!Kgo0wIwA!5syTVR4YSZd_trJ3_7PKlWU2gwjZt2C73MI5Gwu PXUg
Now the same, but twice
Should be something like that:
567209
mecsicaneca
23rd January, 2023, 10:52 AM
Hello, I need to replace the original Astra H radio with another one
The original is a CD30MP3 and now I want to put a CD30MP3 from another car, can you help me married the new radio with the display, that is to change the memory and of course the radio code?
I removed the display memory and the new CD30MP3 radio.
Thanks.
The two memories were swapped the radio works without a code but the display after 5-6 seconds says (Program Display)
shooting
23rd January, 2023, 12:48 PM
Hello, I need to replace the original Astra H radio with another one
The original is a CD30MP3 and now I want to put a CD30MP3 from another car, can you help me married the new radio with the display, that is to change the memory and of course the radio code?
I removed the display memory and the new CD30MP3 radio.
Thanks.
The two memories were swapped the radio works without a code but the display after 5-6 seconds says (Program Display)
Use this in the new radio - PIN: 1386
wbr
mecsicaneca
24th January, 2023, 09:59 AM
Thanks Shoting but it makes no difference even the radio doesn't work normally :(
Is there an option for them to be different versions and not be able to marry the display?
shooting
24th January, 2023, 10:08 AM
Thanks Shoting but it makes no difference even the radio doesn't work normally :(
Is there an option for them to be different versions and not be able to marry the display?
Did you actually try my dump or are you assuming?
wbr
mecsicaneca
24th January, 2023, 11:52 AM
I tried it!
Strange but it didn't ask me for a code.
The effect was the same on the display during a certain time it reads (program display)
shooting
24th January, 2023, 11:56 AM
I tried it!
Strange but it didn't ask me for a code.
The effect was the same on the display during a certain time it reads (program display)
Then that's all you need to do, what tool are you using?
wbr
mecsicaneca
24th January, 2023, 04:34 PM
I use this programmer RT809H
shooting
24th January, 2023, 04:50 PM
I use this programmer RT809H
No, what OBD2 tool are you using in the car?
wbr
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.