View Full Version : FIAT SCUDO edc16c34 please help
immokill
27th October, 2018, 12:17 PM
Please help
I need EGR OFF tested solution i cant do it please someone .
0 281 013 869 is ecu edc16c34
Please help
Regards
immokill
27th October, 2018, 12:38 PM
Please help mates
thanks
Team dz
27th October, 2018, 12:51 PM
here this egr off
immokill
27th October, 2018, 12:56 PM
i will try now 8 minutes
immokill
27th October, 2018, 01:02 PM
With your file kess says checksumm error writing buffer and wont write file?
immokill
27th October, 2018, 01:44 PM
Something is wrong does any body has full backup readed with bdm 555 for this
fiat scudo
0 281 013 869
1037393467
]
or just FLASH readed with bdm i need please original software
Team dz
27th October, 2018, 01:48 PM
MPC BDM 100
Good at it
KESS NOT GOOD IT
immokill
27th October, 2018, 02:11 PM
Thanks i have bdm do you have original file for this ecu to write with bdm100. Full backup or separetly exported flash file because this file in first post is already done by someone elae
golf3ale
27th October, 2018, 02:21 PM
Have you solved?
voltechcar
27th October, 2018, 02:23 PM
this file is bad, he edit ADS software and send people file..... Check what he doing , this never work. Kess china show crc error because file have fix crc in winols
AVDigitale
27th October, 2018, 02:32 PM
yes is correct when you correct cks with winols and like to try to flash with kess checksum error buffer apper
egr is very easy in this ecu
immokill
27th October, 2018, 03:24 PM
Have you solved?
No
i cant write this file with krss. I would like to find original flash bdm readed and then if someone can help me to turn egr off valve
immokill
27th October, 2018, 03:26 PM
Kess says error checkssum in file .
Sent from my iPhone using Tapatalk
Team dz
27th October, 2018, 06:33 PM
Programme with bdm 100 m'y frined
voltechcar
27th October, 2018, 08:48 PM
Please help
I need EGR OFF tested solution i cant do it please someone .
0 281 013 869 is ecu edc16c34
Please help
Regards
this write....
immokill
28th October, 2018, 02:45 PM
With kess bro? Can you please do checksum on your file i dont have genuine winlos ?
Thanks
AVDigitale
28th October, 2018, 04:49 PM
flash voltech file and you will be ok
let kess to make crc
immokill
29th October, 2018, 11:19 AM
this write....
kESS says CHECKSUM BUFFER ERROR \
why , when write file that is ori from another member it writes file ok
AVDigitale
29th October, 2018, 01:01 PM
Write file with fgtech galletto
immokill
29th October, 2018, 02:23 PM
When I read file with BDM100 and do egr off like voltechcar (http://www.digital-kaos.co.uk/forums/member.php/485160-voltechcar) car goes when I DELETE ERRORS but first ignition off and wait when i start car goes in limp mode 3000rmp . delete errors,,, but there is no errors visible ,,car going good until turn off engine .
What is problem here is what i read with bdm100 .
voltechcar
29th October, 2018, 03:13 PM
limp with dtc, what dtc you have on orginal file?
immokill
29th October, 2018, 03:33 PM
Egr on original about egr sensor voltage
immokill
29th October, 2018, 03:46 PM
Very strange software number is not same when read with kess and bdm100 . When read with bdm you can see sofrware is not same like I wrotet in upper post ????
immokill
29th October, 2018, 04:17 PM
Dtc. That i delete are Aditional heater .aditional heater and ac pressure switch .when clear errors one stay ac pressure switch never mind no refrigent in clima but what aditional heating can make problem .when clear that two errors cars goes out of limp mode . ????
voltechcar
29th October, 2018, 05:34 PM
write to me on skype, I not have time wait when you answear. This is easy ecu........
immokill
30th October, 2018, 01:55 PM
i put original file and did egr offr SAME thing it drives until I turn ignition off thrn next start limp mode to 3000rpm and codes are P1403 P1404 P0532
CAN SOMEBODE HELP ME I will atach original file for this ecu here it is
please help me turn egr off on this file to try
immokill
30th October, 2018, 02:39 PM
I think that this errors P1403 P1404 is for EGR vaslve ??? But my diag tool translate it like aditional heater 2 and 1 I think that googled EGR valve ???? Dont know anymore. Iam comfused
AVDigitale
30th October, 2018, 03:23 PM
try this and report pass in PM!
immokill
30th October, 2018, 03:53 PM
I will try now 8 minutes
immokill
30th October, 2018, 04:04 PM
Same thing. No more errors but has new errors.
Telecode. and. CAN no more error 1403 and 1404 but limp mode 3000rpm
AVDigitale
30th October, 2018, 04:20 PM
disconnect egr plug
AVDigitale
30th October, 2018, 04:34 PM
try and this the same pass is and report
immokill
31st October, 2018, 12:48 PM
try and this the same pass is and report
With this I HAVE EGR RELATED DTC MATE ? NoW CAR RUNS ONLY ONE TIME AND THEN WHEN ERROR APEAR ON DASH IT GOED IN LIMP 3000RPM ?
Can somebody for sure do this egr off please is it possible that no one cant do it
immokill
31st October, 2018, 01:07 PM
P0405 p2143 and now P1613 telecoding injectors????
johak
31st October, 2018, 01:23 PM
here you go
immokill
31st October, 2018, 02:56 PM
With this file lamp is permamenrly ON and didnt drive but will drive now and test
immokill
31st October, 2018, 03:16 PM
Lamp is on I turn ign off wait 5sec start car no lamp and no limp mode but always lamp on and limp on on first starting ??
johak
31st October, 2018, 03:18 PM
dtc? .
immokill
31st October, 2018, 04:12 PM
p1403 p1404 ac pressure and CAN comm it is like before but now when turn ignition off wait 5 sec car goes out of limp mode only on first starting there is limp mode ???
,how to telecode this ecu diagbox cant do it pps2000 no, lexia no What about EXAMINER?
:banghead::banghead::banghead::banghead::banghead: :banghead:
johak
31st October, 2018, 10:56 PM
write this............
banelab
31st October, 2018, 11:23 PM
U can do it with pp2000 just put some vin numbers,for me it works 1111111111.
Long ago i have same prob with limp mode with egr off (just put connector back with egr off and all ok)
proveri i grejace :)
immokill
1st November, 2018, 06:29 PM
Istavio sam novi relej za grejace i uopste nemam lampu za grejace niti ih pali. I u to sam posumnjao
voltechcar
1st November, 2018, 09:20 PM
2 weeks you try cut in edc16, what when you have edc17? 4 weeks?
immokill
2nd November, 2018, 03:29 PM
mate car was with some dump from another car and car was here with towing service
this is first time that i have this kind of problem, I can put new ecu but must be sure if ecu is problem I put full bdm from jumpy to see with diagbox what is in telecoding maybe ecu is dead or eeprom . Now I have to see and I`M NOT DOING JUST THIS SCUDO ALL DAY MATE :)
immokill
2nd November, 2018, 03:53 PM
S O L V E D. Bad 95160 put new and all ok now no limp mode
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.