FIAT SCUDO edc16c34 please help

[immokill]

Please help

I need EGR OFF tested solution i cant do it please someone .

0 281 013 869 is ecu edc16c34

Please help



Regards

[immokill]

Please help mates

thanks

[Team dz]

here this egr off

[immokill]

i will try now 8 minutes

[immokill]

With your file kess says checksumm error writing buffer and wont write file?

[immokill]

Something is wrong does any body has full backup readed with bdm 555 for this

fiat scudo
0 281 013 869
1037393467
]
or just FLASH readed with bdm i need please original software

[Team dz]

MPC BDM 100
Good at it

KESS NOT GOOD IT

[immokill]

Thanks i have bdm do you have original file for this ecu to write with bdm100. Full backup or separetly exported flash file because this file in first post is already done by someone elae

[golf3ale]

Have you solved?

[voltechcar]

this file is bad, he edit ADS software and send people file..... Check what he doing , this never work. Kess china show crc error because file have fix crc in winols

[AVDigitale]

yes is correct when you correct cks with winols and like to try to flash with kess checksum error buffer apper
egr is very easy in this ecu

[immokill]

Have you solved?

No

i cant write this file with krss. I would like to find original flash bdm readed and then if someone can help me to turn egr off valve

[immokill]

Kess says error checkssum in file .


Sent from my iPhone using Tapatalk

[Team dz]

Programme with bdm 100 m'y frined

[voltechcar]

Please help

I need EGR OFF tested solution i cant do it please someone .

0 281 013 869 is ecu edc16c34

Please help



Regards

this write....

[immokill]

With kess bro? Can you please do checksum on your file i dont have genuine winlos ?

Thanks

[AVDigitale]

flash voltech file and you will be ok
let kess to make crc

[immokill]

this write....


kESS says CHECKSUM BUFFER ERROR \

why , when write file that is ori from another member it writes file ok

[AVDigitale]

Write file with fgtech galletto

[immokill]

When I read file with BDM100 and do egr off like voltechcar (http://www.digital-kaos.co.uk/forums/member.php/485160-voltechcar) car goes when I DELETE ERRORS but first ignition off and wait when i start car goes in limp mode 3000rmp . delete errors,,, but there is no errors visible ,,car going good until turn off engine .
What is problem here is what i read with bdm100 .

[voltechcar]

limp with dtc, what dtc you have on orginal file?

[immokill]

Egr on original about egr sensor voltage

[immokill]

Very strange software number is not same when read with kess and bdm100 . When read with bdm you can see sofrware is not same like I wrotet in upper post ????

[immokill]

Dtc. That i delete are Aditional heater .aditional heater and ac pressure switch .when clear errors one stay ac pressure switch never mind no refrigent in clima but what aditional heating can make problem .when clear that two errors cars goes out of limp mode . ????

[voltechcar]

write to me on skype, I not have time wait when you answear. This is easy ecu........

[immokill]

i put original file and did egr offr SAME thing it drives until I turn ignition off thrn next start limp mode to 3000rpm and codes are P1403 P1404 P0532
CAN SOMEBODE HELP ME I will atach original file for this ecu here it is

please help me turn egr off on this file to try

[immokill]

I think that this errors P1403 P1404 is for EGR vaslve ??? But my diag tool translate it like aditional heater 2 and 1 I think that googled EGR valve ???? Dont know anymore. Iam comfused

[AVDigitale]

try this and report pass in PM!

[immokill]

I will try now 8 minutes

[immokill]

Same thing. No more errors but has new errors.

Telecode. and. CAN no more error 1403 and 1404 but limp mode 3000rpm

[AVDigitale]

disconnect egr plug

[AVDigitale]

try and this the same pass is and report

[immokill]

try and this the same pass is and report

With this I HAVE EGR RELATED DTC MATE ? NoW CAR RUNS ONLY ONE TIME AND THEN WHEN ERROR APEAR ON DASH IT GOED IN LIMP 3000RPM ?

Can somebody for sure do this egr off please is it possible that no one cant do it

[immokill]

P0405 p2143 and now P1613 telecoding injectors????

[johak]

here you go

[immokill]

With this file lamp is permamenrly ON and didnt drive but will drive now and test

[immokill]

Lamp is on I turn ign off wait 5sec start car no lamp and no limp mode but always lamp on and limp on on first starting ??

[johak]

dtc? .

[immokill]

p1403 p1404 ac pressure and CAN comm it is like before but now when turn ignition off wait 5 sec car goes out of limp mode only on first starting there is limp mode ???
,how to telecode this ecu diagbox cant do it pps2000 no, lexia no What about EXAMINER?

:banghead::banghead::banghead::banghead::banghead: :banghead:

[johak]

write this............

[banelab]

U can do it with pp2000 just put some vin numbers,for me it works 1111111111.

Long ago i have same prob with limp mode with egr off (just put connector back with egr off and all ok)
proveri i grejace :)

[immokill]

Istavio sam novi relej za grejace i uopste nemam lampu za grejace niti ih pali. I u to sam posumnjao

[voltechcar]

2 weeks you try cut in edc16, what when you have edc17? 4 weeks?

[immokill]

mate car was with some dump from another car and car was here with towing service
this is first time that i have this kind of problem, I can put new ecu but must be sure if ecu is problem I put full bdm from jumpy to see with diagbox what is in telecoding maybe ecu is dead or eeprom . Now I have to see and I`M NOT DOING JUST THIS SCUDO ALL DAY MATE :)

[immokill]

S O L V E D. Bad 95160 put new and all ok now no limp mode