PDA

View Full Version : Another IMMO Question


PremierD
2nd December, 2009, 05:20 PM
Hellllloooooo People.

Question from punter (customer)..Is it possible to remove the im*o on MarrelI IAW 48P2.80 ..ECU ..from Cireon Saxo VTS ... ( FLASH chip 29f400bc ) ..? Will post dump if it is ..

As always thank-you in advance ...

PS ... Take it easy on me MH...
busaman
2nd December, 2009, 07:46 PM
yes it is possible.
PremierD
2nd December, 2009, 07:55 PM
yes it is possible.

Ok mate ... Will upload to-morrow ....
Meat-Head
2nd December, 2009, 08:52 PM
PS ... Take it easy on me MH...

Eh! Did come across this along time ago, not sure if this the excat page, but it looks good.

http://www.convery.me.uk/ecu-unlock/ecu-unlock.html

I have the orignal page, on a hard driive, with a load of 'Franky Vorn' on it.
busaman
2nd December, 2009, 11:44 PM
try this file.
Meat-Head
15th February, 2010, 09:21 PM
did this shhaxsho run with this file, thanks dude?
gezame
29th March, 2010, 01:08 AM
Hi
This file is for engine 1.1 cc.
Same file immokiller.
Regards.
sparkle
27th May, 2011, 11:53 AM
hi . was this ecu ever sorted ?? i have same ecu from saxo vts , Marelli IAW 48P2.80 . does immokiller ( 1.1.engine ) work on this ecu ? does anyone have a solution ?

sparkle
grinovsky
27th May, 2011, 12:16 PM
you need perair dump after engine start with immo off
sparkle
27th May, 2011, 12:36 PM
dont really understand your reply grinovsky . i need an immo off solution for this ecu .

sparkle
grinovsky
27th May, 2011, 01:16 PM
when you do an immo off with immo soft many maps will be change but the engine will start ,so you have to restore the dump's map after engine start
sparkle
27th May, 2011, 01:59 PM
ok , now i understand . so i use immokiller to remove immo & then i need to restore maps ...........can you point out map location that needs to be restored ??
thanks for your help

sparkle
grinovsky
27th May, 2011, 02:06 PM
compare the immo off dump with original dump and restore the immo off dump to original
sparkle
27th May, 2011, 02:11 PM
ok , but i need to know where the immo data has changed so i dont restore that aswell ................

sparkle
sparkle
28th May, 2011, 11:54 AM
i have compared both dumps ( original & immo off by immokiller ) and i see huge difference . can you advise where immo data is or map data that needs to be rewritten back into immo off file . i have attached both files for your attention . thank you grinovsky

sparkle
latino
28th May, 2011, 11:08 PM
hi m8...immo off is possible?? need cut some wire??need programe??

thanks
luco7
29th May, 2011, 12:04 AM
.immo total

citroen C3_IAW 48P2.32_29F400B
latino
31st May, 2011, 07:59 AM
sory dont work..thanks
sazam
9th June, 2011, 12:28 PM
compare the immo off dump with original dump and restore the immo off dump to original

Hi, if you make this, cheksum is bad?

thanks in advance