View Full Version : opel INSIGNIA 2.0 cdti immo off
gepakg
31st October, 2018, 08:30 PM
Hi!
Possible 100% tested immo off on opel Insignia 2.0 cdti?
bosch ecu edc17c18/19
0 281 015 774 --- 55573539
here is eeprom+flash
thanx in advance
regards Gepa
gepakg
1st November, 2018, 05:43 PM
any help to this?
regards Gepa
Hi!
Possible 100% tested immo off on opel Insignia 2.0 cdti?
bosch ecu edc17c18/19
0 281 015 774 --- 55573539
here is eeprom+flash
thanx in advance
regards Gepa
vlaki electric
1st November, 2018, 05:50 PM
Hi!
Possible 100% tested immo off on opel Insignia 2.0 cdti?
bosch ecu edc17c18/19
0 281 015 774 --- 55573539
here is eeprom+flash
thanx in advance
regards Gepa
i think this is ok... pass in pm
568811
gepakg
1st November, 2018, 06:29 PM
yes,tried usual solution for edc17 sequence 8b 02 20 22 to 00 00 82 12 but didn`t work
anyway thanx :)
any other solution?
regards Gepa
i think this is ok... pass in pm
568811
kire106ka
2nd November, 2018, 12:48 AM
Hello gepa these ecu impossible immo off byt you can program online with mdi in opel or i can give you contact who can do it near you
Regards Kire
gepakg
2nd November, 2018, 01:34 AM
thank you friend but i also tried everything :)
manually do in pcf7936 from BCM data ID,crypto and cfg,chk but didnt start,also match data from BCM to ecu eeprom VIN,pin,crypto,id,cfg,chks and didnt start,than with pin make all with MDI but still dont start,then i try to make immo off,but as i see impossible :)
now must research what is wrong
thanx anyway
regards Gepa
Hello gepa these ecu impossible immo off byt you can program online with mdi in opel or i can give you contact who can do it near you
Regards Kire
gepakg
5th November, 2018, 10:00 AM
then mr.Zaheer can you immo of this? :)
regards Gepa
Hi!
Possible 100% tested immo off on opel Insignia 2.0 cdti?
bosch ecu edc17c18/19
0 281 015 774 --- 55573539
here is eeprom+flash
thanx in advance
regards Gepa
Bllinda
5th November, 2018, 10:35 AM
Upload here for the forum or email.
I.2.C is the entire.NEC.MCU.
gepakg
5th November, 2018, 11:43 AM
upload-ed in first post
regards Gepa
Upload here for the forum or email.
I.2.C is the entire.NEC.MCU.
Bllinda
5th November, 2018, 11:56 AM
upload-ed in first post
regards Gepa
B.C.M for reading?
Upload here for the forum or email.
I.2.C is the entire.NEC.MCU.
gepakg
7th November, 2018, 10:41 PM
ok,here is from dump from BCM
regards Gepa
B.C.M for reading?
Bllinda
9th November, 2018, 12:13 AM
M.C.U humidity is also needed
gepakg
9th November, 2018, 12:18 AM
for immo off???
regards Gepa
M.C.U humidity is also needed
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.