pinout bdm ecu ford focus 1.6 tdci edc16c34 help me!

[dashtool2016]

I need someone to help me connect galletov54 by bdm to the ecu of ford focus edc16c34 and had a problem trying to write by obd and the ecu is now blocked I have eeprom read out and flash read by galletov54 but I need colors or some small scheme of how to connect by bdm thanks

[rh03]

use bdm probe, like bosch optican, I did this ecu on bdm with ktag an bosch optican probe, during 5 minutes.

Also I used kess for obd writing and no problem

[teerak2uk]

use bdm probe, like bosch optican, I did this ecu on bdm with ktag an bosch optican probe, during 5 minutes.

Also I used kess for obd writing and no problemObd 2008+ is risky

[dashtool2016]

I do not have a probe, can not you help me with the colorful galleto cable? or can I use x-prog? any advice ? Thank you

[dashtool2016]

galleto can read this ecu but can not write throws this error can someone help me? by bdm I do not know what scheme to use that works please help !!!

[teerak2uk]

What if you try to write original instead of modified.

Maybe your clone tool is not very good requiring rework

https://uploads.tapatalk-cdn.com/20181103/d8120b2441266554cd513de703cb86bd.jpghttps://uploads.tapatalk-cdn.com/20181103/cdffdddabb865a12f5c2bb07079d859e.jpg

[dashtool2016]

if I write original it says the same thing but if e read by bdm med9.1 without problem but edc16c34 there is no way ...


Could it be the chips problem ??? Can I buy and replace this model?
hhttps://es.aliexpress.com/item/Free-shipping-20-PCS-74HC14D-74HC14-SOP-14-Hex-inverting-Schmitt-trigger/863186698.html?spm=2114.12057483.0.0.56e74015qQoE2 M

thank you

[teerak2uk]

Chips may cure it if this is the problem but also possible you bricked the ECU.

Always best to rework stuff from China as they either have poor/wrong components fitted or both

[dashtool2016]

the ecu is blocked but i can write eep and flash here are my files in case you can check them? the car now does not start I need to load flash by bdm to fix it?

[teerak2uk]

the ecu is blocked but i can write eep and flash here are my files in case you can check them? the car now does not start I need to load flash by bdm to fix it?I can't check them maybe someone else can