Peugeot 308 2015 key fob - lost key.

[castin]

I tryet add key with vvdi2 for peugeot 308 - keyless system. Vvdi2 can't read key data, i think no ignition. Hawe pin, but cant add keyless key. Any idea, meybe force ignition, but how?

[jodge]

i previously tried the vvdi on 2012 508 keyless and only the pin reading worked. No immo connection nor key learning available even with one working key

[castin]

So Diagbox must triet. Does anyone have information about smart key programming when all keys are lost? Will the must be forced ignition and how to do it?

[rob h]

Just wake up bsi by pressing start button, you can enter by diagnostic.
Then program key, using diagbox.

Vvdi failed me on programming, or simply use delphi.

[hollanda]

Try to turn radio on, press on brakes, emergency lights and turn headlights. Most cars will wake up the car

[castin]

Im tryet, but no luck. The car dont write key. I hawe orginal key from ASO (open PCF7953 keyless) and china key keyless. One lockmitch and me can't add key. Antena send signal (check VVDI Key Tool), but two device can,t write key data.

[rob h]

Is the pin accepted?
And where did you place the key?

[castin]

Yes, PIN accepted, two different tool - the same PIN.
The key is applied in the middle storage compartment, in different positions of the key.

[rob h]

Should work.
Diagbox yes, vvdi not sure.
Are the Keys locked?

[EMCE159]

Had same situation, vvdi readed pin correctly, but couldn't adapt the key. In my case skp900 worked.

[castin]

All key are open -non locked pcf and precoded.

[rob h]

Disconnect battery, for 15min.
Then reconnect and hook up a battery supplier.
Lets make sure that the voltage is up.

I dont think that there is a timer, and the correct pin is accepted.
What bsi do you have, continental?
If conti, select 508.





All key are open -non locked pcf and precoded.

[castin]

BSI Conti, the car went to another specialist on the trailer. We'll see

[HeXeN]

What type of transponder you have: pcf7945/7953 or AES 4A ?
I had problems when vvdi2 read pin it couldn't program, and londsor couldnt read pin but programm ok.

[castin]

Pcf7953, skp1000 stuck when key program.