View Full Version : Golf IV 1.6 with Marelli ECU
redful
2nd December, 2009, 09:09 PM
hy i have a golf4 2001 1.6 16v
with ECU magneti marelli IAW4MV.GC 036 906 034 CN
I have not the oreginal dump of 95080 i have a dump
for used ECU
car not start,I like to adapt the used dump to start the car
in the attach the dump of dash and used ecu
THANK YOU
lupu_sandu
2nd December, 2009, 11:31 PM
Dash Pin code: 04154
ECU Pin code: 07939
Using VCDS or Vagcom go to:
Instruments>Login using dash pin code>Adaption>Channel 50>Enter Pin from ECU>Save>Close Controller.
Ignition Off>Wait 1 minute
Ignition On > If car will not start try to readapt keys.
PS: If adaption will not work try to enter Pin from Ecu without 0 in front.
ivica
2nd December, 2009, 11:55 PM
Dash Pin code: 04154
ECU Pin code: 07939
Using VCDS or Vagcom go to:
Instruments>Login using dash pin code>Adaption>Channel 50>Enter Pin from ECU>Save>Close Controller.
Ignition Off>Wait 1 minute
Ignition On > If car will not start try to readapt keys.
PS: If adaption will not work try to enter Pin from Ecu without 0 in front.
What software do you use to find ECU pin and dash pin code?
regards
redful
3rd December, 2009, 12:25 AM
thank you lupu_sandu
I try it towmorro and I report
lupu_sandu
3rd December, 2009, 12:30 AM
Immoreader 5 and Nyo4 for pin code.
ivica
3rd December, 2009, 12:44 AM
im*oreader 5 and Nyo4 for pin code.
Can you share im*oreader 5?
regards
redful
3rd December, 2009, 08:26 AM
this is im*oreader 5
redful
3rd December, 2009, 02:49 PM
Dash Pin code: 04154
ECU Pin code: 07939
Using VCDS or Vagcom go to:
Instruments>Login using dash pin code>Adaption>Channel 50>Enter Pin from ECU>Save>Close Controller.
Ignition Off>Wait 1 minute
Ignition On > If car will not start try to readapt keys.
PS: If adaption will not work try to enter Pin from Ecu without 0 in front.
thanks but the ECU PIN code is invalid the car is not start
eleeinidis
3rd December, 2009, 02:58 PM
GOLF 4 95080 CLEAR BIN
redful
6th December, 2009, 04:31 PM
Dash Pin code: 04154
ECU Pin code: 07939
Using VCDS or Vagcom go to:
Instruments>Login using dash pin code>Adaption>Channel 50>Enter Pin from ECU>Save>Close Controller.
Ignition Off>Wait 1 minute
Ignition On > If car will not start try to readapt keys.
PS: If adaption will not work try to enter Pin from Ecu without 0 in front.
thank you lupu_sandu
its solved the two pin are valid
the waitig time is active
I use VCDS:
engine>login using ECU pin code>adaption>channel50>enter pin from dash>test>save>close controller
thanks
busaman
6th December, 2009, 04:50 PM
this is im*oreader 5
is there any reason for the soft saying it has a virus.
atemesi77
14th January, 2010, 11:33 AM
Hi all!
i have a Race 2000 sofware
I have a golf 4 1.6 16V (2001)
the software is not included in the original file.
Please help me.
Thanks
umut66
5th July, 2010, 05:10 PM
immo reader vrusss
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.