PDA

View Full Version : Digiflasher Pro 1250 and EDC16


chli1976
2nd December, 2009, 10:34 PM
Have anyone Digiflasher Pro and have write successful a Golf V EDC16 ECU.
zecas
3rd December, 2009, 03:31 PM
hi

i think it is a simple galletto 1250
no?

regards
chli1976
3rd December, 2009, 04:03 PM
I dont know
Maxomat
4th December, 2009, 09:01 AM
is a galetto clone.

I wrote a few EDC 16 (3 Mercedes one Audi and one VW T5) It works quite good.
chli1976
4th December, 2009, 10:13 AM
Have you calculate checksum with winols, or do this the flasher himself.
pug_dari
4th December, 2009, 09:15 PM
What software use the Digiflasher Pro, if any one have, can you share, just to see the list car supply.
chli1976
4th December, 2009, 11:13 PM
Here a list
mods4cars
7th December, 2009, 01:01 PM
Have anyone Digiflasher Pro and have write successful a Golf V EDC16 ECU.

Galleto only
Maxomat
10th December, 2009, 11:43 AM
The soft calculates EDC16 checksums. EDC 15 have to be calculated before writing
I'll search the soft for you
chli1976
10th December, 2009, 12:35 PM
I have winols to calculate checksum, but the digiflasher soft should calculate the checksums wrong.
zecas
10th December, 2009, 07:50 PM
Hi

does any one knows where to get a copy of this digiflash pro?

regards
chli1976
10th December, 2009, 09:53 PM
Hardware or software ?
zecas
11th December, 2009, 01:52 AM
just the software

regards
zecas
chli1976
12th December, 2009, 01:58 AM
Here the link

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/319619379/DigiFlasher_1250_Setup.rar.html)
zecas
13th December, 2009, 07:44 PM
Here the link

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/319619379/DigiFlasher_1250_Setup.rar.html)


this is just an simple galletto 1250 without any changes.
you can use version 1260 it works on VISTA and works better then 1250 (in my opinion).

regards
obywan
17th December, 2009, 07:26 AM
what interface recommend for BMW e46 facelift 150HP ? M47N
hencca
17th December, 2009, 03:08 PM
what interface recommend for BMW e46 facelift 150HP ? M47N

I'm going to try flashing M47's chip by this weekend. Car is though X3 2.0d, but i think it's the same engine. I own several different interface cables, and i'll inform results by next monday...

BMWX3 2.0 d2000 d150330+24+45CR-REG-1 (http://www.cth.be/shop/tech.php?t=1)
eismann
15th October, 2011, 12:43 PM
I have this programmer, and has an adjustable pullup resistance, with 3 values 260, 500, and 1 k what value is best to use on EDC15 and EDC16? or what value ist default??

thanks!!!