PDA

View Full Version : Kess ,,Micro wake up Error,, boot mode



karol123
4th November, 2018, 09:54 PM
Hey.I have a problem with KESS 5.017 (red PCB).
When I try to read EDC17cp14 (Passat, 2009year) using the boot mode,
the message "MICRO Wakeup Error" appears. I tried a different computer, a good power supply, different protocols and nothing helped.
I used the connection from the KESS instructions. Did anyone have a similar problem? Anyone have a checked PINOUT for this ECU?

Thanks for your help in advance.

raceshadow
5th November, 2018, 07:54 AM
It is red pcb from China or EU made?

karol123
5th November, 2018, 08:36 AM
Red pcb china

carmageddon
5th November, 2018, 09:39 AM
Hey.I have a problem with KESS 5.017 (red PCB).
When I try to read EDC17cp14 (Passat, 2009year) using the boot mode,
the message "MICRO Wakeup Error" appears. I tried a different computer, a good power supply, different protocols and nothing helped.
I used the connection from the KESS instructions. Did anyone have a similar problem? Anyone have a checked PINOUT for this ECU?

Thanks for your help in advance.

check pin position of your boot cable

karol123
5th November, 2018, 10:18 AM
check pin position of your boot cable


Thanks.I checked DB15. It's ok, according to your photo.
Reading via obd works ok, only the boot mode reading does not work.
Maybe the tricore module is not working properly?

carmageddon
5th November, 2018, 10:41 AM
Thanks.I checked DB15. It's ok, according to your photo.
Reading via obd works ok, only the boot mode reading does not work.
Maybe the tricore module is not working properly?

have you changed all components wrong?

ALL china tools need rework!

karol123
5th November, 2018, 06:10 PM
have you changed all components wrong?

ALL china tools need rework!

I changed the components only in Kess. I did not change anything in the tricore module.

thebigf2
5th November, 2018, 06:21 PM
Wrong protocol selected ...

Try older one .. like Prt151

caja88
5th November, 2018, 09:08 PM
have you changed all components wrong?

ALL china tools need rework!
any link to rework?

karol123
5th November, 2018, 10:27 PM
Wrong protocol selected ...

Try older one .. like Prt151

I tried all the EDC17 protocols. PRT 151 too.

raceshadow
6th November, 2018, 10:20 AM
any link to rework?

............................................

siriusx
2nd April, 2019, 04:15 AM
hi there, I got same problem when reading my BOSCH MED17.5.5...May I know if it is necessary to do the rework? Coz its already a newest version 2.47...

siriusx
2nd April, 2019, 05:48 AM
hi there, I got same problem when reading my BOSCH MED17.5.5...May I know if it is necessary to do the rework? Coz its already a newest version 2.47...
I found some thread said what I have to do is to replace the SD card with new files...
But I can't find any file avaliable online, do you guys have any?

carmageddon
2nd April, 2019, 06:03 AM
all china clone need rework...always!

siriusx
2nd April, 2019, 01:23 PM
all china clone need rework...always!

You mean in the hardware way?


從我的iPhone使用Tapatalk 發送

vilin
21st August, 2020, 07:56 AM
Hello, tell me how you solved the problem with the "Micro wake up Error" error in boot mode with Kess 5.017? I have the same error when reading MED17.5, Passat B6 1.8 TSI. I tried to update the program, the result is the same.

vilin
21st August, 2020, 08:09 AM
Hey.I have a problem with KESS 5.017 (red PCB).
When I try to read EDC17cp14 (Passat, 2009year) using the boot mode,
the message "MICRO Wakeup Error" appears. I tried a different computer, a good power supply, different protocols and nothing helped.
I used the connection from the KESS instructions. Did anyone have a similar problem? Anyone have a checked PINOUT for this ECU?

Thanks for your help in advance.

Hello, tell me how you solved the problem with the "Micro wake up Error" error in boot mode with Kess 5.017? I have the same error when reading MED17.5, Passat B6 1.8 TSI. I tried to update the program, the result is the same.

damjantuze
21st August, 2020, 08:36 PM
U are making risk of brick the ecu its dangerous to read or write edc17cp17 or med17.5 with clone kess be aware need rework the china tool better use Ktag boot mode its working ok