Pioneer KEH 9000 RDS code

[laluva]

Hi
Bought this radio in a lot with other old car stereos.
It was a really high end cassette deck back in those days.

Of course the code is missing.

I think there is no code generator for this radio and that some kind of eeprom PDG011 or CXK1011 has to be read.

Is there anybody here who has some experience with this and can point me in the right direction of where to start?

I have som pic and eeprom programmers, but don't know if they are correct.

I have these programmers: K150, CH341A, an old Multiprogrammer V3.5, also have a SOIC8 clip.

Thanks

[audio]

Hi!
Any 93cXX (93C06) read is, irrelevant because the content can only be "headed" by the code .....
wbr.
audio

https://datasheetspdf.com/pdf-file/912386/SonyCorporation/CXK1011P/1

[RadioChiP]

Wrong info,Try Read Elnec seeprog

[audio]

Wrong info,Try Read Elnec seeprog

Hi!

As above, @lanuva wrote about what kind of programming tools are available, so I wrote it to read as Micro Wire 93c06. It will not be a problem with eeprom if you read it. To the point, I correct that 93C46 is a good alternative because we are interested in code # 30h.
Because he only needs the code, so there is no need to write back that could cause a problem .....

w.b.r. audio

[RadioChiP]

I have PDG011 Working Good,I try read 93c06/46 standart pinout+rotated Can not read upa+seeprog

Seeprog only Read select chip PDG011

[audio]

All right!

I do not have PDG or CXK eeprom here, but if you tried it and it was not good I accept it! I just tried to give you an alternative.
Have a nice day!
audio

[laluva]

Hi!
Any 93cXX (93C06) read is, irrelevant because the content can only be "headed" by the code .....
wbr.
audio

https://datasheetspdf.com/pdf-file/912386/SonyCorporation/CXK1011P/1


Hi, thanks for answer.

To make it clear.
Yes I only need to read, and then probably need some help to decode the file to find the code.

Do not understand what you mean, 93C06 is a chip,programmer or reader?
Can any of my K150, CH341A, an old Multiprogrammer V3.5 read this?

[laluva]

I have PDG011 Working Good,I try read 93c06/46 standart pinout+rotated Can not read upa+seeprog

Seeprog only Read select chip PDG011


Hi, do you mean that only this SEEprog can read this chip?

[RadioChiP]

Yes Seeprog Read & Write Ok
Upa can Read & Write Select Chip Cxk1011 Ok